Download Commissioning with the software CoDeSys for

Modbus-TCP master
In the opened master program PLC_PRG (PRG) you will receive a new range after "Insert
> Network (after)". Insert a new component here with "Insert > Box". By default, "AND" is
assigned to the component.
Check "AND". The input mask for the component is opened via the shortcut "F2". Select
"User defined Programs" from the list in the left space of the window. Check the
"Modbus_Comm" program defined above and acknowledge with OK.
Figure 73:
Inserting the
new component
Modbus_Comm
into the master
program
PLC_PRG.
In the Online mode (Online > Login or
programmable gateway and start it (
) download the expanded program into the
)!
Configuration of the Modbus-TCP-interface in the control software
Open the visualization software "Galileo" and if need be, create a new project. In the first step
you are asked to select the type of your control from the list:
Figure 74:
Device type of
the control
D101640 0109 - BL ident ® CoDeSys
4-11