Download Hong Yu Da

Shenzhen HongYuDa CNC Technology Co.,Ltd.
4.2. Settings of XPTHC-200
4.2.1. Settings of ascending speed
XPTHC-200 sets manual and outer controlled ascending speed through two-band switch
SUP1 (on the arc voltage control panel), but ascending speed in automatic mode are not
related with the settings. It is only related with the settings of sensitivity. See figure 4-3
SDN1 descending speed setting switch
2# control logic chip
SUP1 ascending speed setting switch
SDL1 positioning speed setting switch
1# control logic chip
Figure 4-3: location of speed setting band switch
16