Download Manual
Transcript
TOPEX MobiLink ISDN2GSM 3.5. User`s Manual Installing the external antennas MobiLink ISDN 2 GSM features two RF connectors on top, for connecting the antennas for the wireless network. You may use: □ □ the wideband antenna supplied with the package, with cable and magnetic base (see below characteristics) or other kinds of external antennas with higher gain or directivity (Yagi), if the need arises. The following table shows the main characteristics of the dual-band stick antennas with magnetic base (currently supplied with the MobiLink ISDN 2 GSM package). GSM 890-960 MHz PCN 1710-1880 MHz PCS 1850-1990 MHz 2 dBi Vertical Magnetic, 2,8cm Type RG174, length 2,5 m Female FME Frequency bands Gain Polarization Base Cable Connector The two antennas must be threaded to the FME male connectors located on top of the MobiLink ISDN 2 GSM unit, as shown in the following drawing. Figure 3-4 Connecting external antennas. 18