Download Manual

Transcript
TOPEX MobiLink ISDN2GSM
3.5.
User`s Manual
Installing the external antennas
MobiLink ISDN 2 GSM features two RF connectors on top, for
connecting the antennas for the wireless network. You may use:
□
□
the wideband antenna supplied with the package, with cable
and magnetic base (see below characteristics)
or other kinds of external antennas with higher gain or
directivity (Yagi), if the need arises.
The following table shows the main characteristics of the dual-band
stick antennas with magnetic base (currently supplied with the
MobiLink ISDN 2 GSM package).
GSM
890-960 MHz
PCN 1710-1880 MHz
PCS 1850-1990 MHz
2 dBi
Vertical
Magnetic, 2,8cm
Type RG174, length 2,5 m
Female FME
Frequency bands
Gain
Polarization
Base
Cable
Connector
The two antennas must be threaded to the FME male connectors
located on top of the MobiLink ISDN 2 GSM unit, as shown in the
following drawing.
Figure 3-4 Connecting external antennas.
18