Download USER`S MANUAL
Transcript
Troubleshooting Tips for Improving System Performance Maintain a line of sight between transmitter and antenna. Avoid placing the receiver near metal surfaces or any digital equipment (CD players, computers, etc). Keep the receiver away from the wall and over 1m to the ground. Cellular telephones, two-way radios and other RF transmitters can interfere with the transmitting frequencies, maintain a distance from interfering equipment. Troubleshooting Issue No sound or faint sound. Indicator Status Solution Transmitter ON Indicator stop flashing Turn on transmitter. Make sure the +/- indicator on battery match the transmitter terminals Power indicator off Make sure AC adapter is securely plugged into electrical outlet and into DC input connector on rear panel of receiver. Receiver RF indicator glows Turn the receiver up Turn up the Gain adjustment switch in the transmitter Check the power connection of the receiver and amplifier or mixer Receiver RF indicator off, transmitter indicator ON Take the receiver away from the metal objects Check whether there are obstructions between receiver and transmitter Move the transmitter near the receiver Check the receiver and transmitter whether use the same frequency Transmitter low battery indicator ON Change the batteries in transmitter. Distortion or unwanted noise bursts. Receiver RF indicator ON Remove nearby sources of RF interference (CD players, computers, in-ear monitor systems, etc.) Distortion level increases gradually. Transmitter low battery indicator ON Replace Transmitter batteries. Sound level different from cabled guitar or microphone, or when using different guitars. Adjust Transmitter Gain and Receiver Volume as necessary. 15