Download AV transfer

Operation
AVtransfer 3.2 r 1
Sample Procedures
4. Start up AVtransfer and open the project or files into the explorer.
5. Select the project, then click Play Project.
or
Select the individual files, then click Play files.
The project is displayed as 32 tracks in the view/render menu.
6. Select the tracks that comprise the final mix (usually 1&2 for a stereo
mix).
De-select all other tracks.
7. Optionally set In and Out points.
The |<- and ->| buttons will help locate project edit points quickly.
8. Click Mixdown.
In the render properties menu select:
Mono or Stereo as appropriate
Render at Unity - if the project is already mixed down to two tracks,
otherwise use the gain reduction options.
Optionally specify silence at head and tail
9. Click GO!
10. Specify a filename.
This will produce a stereo (or mono if selected) wave file. Repeat the
process as necessary for all the CD content.
Burning an audio CD from stereo wave files is a relatively straight forward
process. Refer to the documentation that came with your audio CD
burning software if necessary.
note:
Burning a CD can take up to an hour and a half depending
on the drive and computer configuration.
79