Download 9399-APSQS - APS Quick Start for New Users
Transcript
APS Quick Start for New Users Preface Data Files Data files contain the data associated with the program files. Each processor file can contain up to 256 data files. These files are organized by the type of data they contain. Each piece of data in each of these files has an address associated with it that identifies it for use in the program file. For example, an input point has an address that represents its location in the input data file. Likewise, a timer in the timer data file has an address associated with it that allows you to represent it in the program file. The first 9 data files (0 - 8) have default types. You designate the remainder of the files (9 - 255). The default types are: • File 0 Output Data This file stores the status of the output terminals for the controller. • File 1 Input Data This file stores the status of the input terminals for the controller. • File 2 Status Data This file stores controller operation information. • Files 3 7 These files are pre-defined as Bit, Timers, Counters, Control, and Integer data storage, respectively. • File 8 Float Data This file is used by SLC 5/03t OS301, OS302 processors and SLC 5/04t OS400, OS401 processors for Float data storage. • Files 9 255 These files are user-defined as Bit, Timer, Counters, Control, Integer, Float, String, and ASCII data storage. Most of your work with data files will be in files 0 and 1, the output and input files. Refer to appendix A for an example of the Timer data file. 2–4