Download EtherNet/IP Units Operation
Transcript
Section 11-7 Using File Memory 11-7-3 Initializing File Memory Memory Memory Cards Initialization method 1. Insert the Memory Card into the CPU Unit. 2. Initialize the Memory Card from a Programming Device (Programming Consoles included). EM File Mem- 1. Specify in the PLC Setup the first bank to convert to file memory. ory 2. Initialize EM File Memory from the CX-Programmer. 11-7-4 I/O Memory Data Format ■ IOM Format The IOM format is a data format used for binary data specified by the ladder instructions, READ DATA FILE (FREAD(700)) and WRITE DATA FILE (FWRIT(701)), in the CPU Unit. If five words of data from the I/O memory (1234 hexadecimal, 5678 hexadecimal, 9ABC hexadecimal, etc.) is contained in an attached file in IOM format, the data will be stored in the attached file as shown in the following diagram. Example: Binary data format with a delimiter after every 10 fields. I/O memory +0 +10 +0 +1 1234 5678 9ABC DEF0 +2 +3 9ABC DEF0 1234 +4 +5 1234 5678 5678 9ABC DEF0 +6 +7 9ABC DEF0 1234 +8 +9 1234 5678 5678 9ABC DEF0 .IOM file contents XX XX XX 12 34 56 78 9A BC DE F0 12 34 48 bytes (Reserved by the system.) ■ TXT Format The TXT format is a data format (using tab delimiters) specified by the ladder instructions, READ DATA FILE (FREAD(700)) and WRITE DATA FILE (FWRIT(701)), in the CPU Unit. The format is configured according to the specified FREAD(700) and FWRIT(701) parameters, as follows: Data format • Words without delimiters • Double words without delimiters • Words delimited by tabs. • Double words delimited by tabs Use of CRs and CR position • No CRs • CR after every 10 fields. • CR after each field. • CR after every 2 fields. • CR after every 4 fields. • CR after every 5 fields. • CR after every 16 fields. If data from the I/O memory (1234 hexadecimal, 5678 hexadecimal, 9ABC hexadecimal, etc.) is contained in an attached file in TXT format, the data will be converted into ASCII format in words or double-words. The words are delimited by inserting tabs ([HT]: 09), and carriage returns (CR) after specified fields ([CR][LF]: 0D0A). 305
Related documents
SYSMAC CS and CJ Series CS1W-EIP21 (100Base-TX
Production of morphological dictionaries of multi
Manual - Port-A-Cool
SYSMAC CS and CJ Series EtherNet/IP Units OPERATION MANUAL
SEZAM USER`S MANUAL
LS-572
Omron CS1W-ETN21 User's Manual
CJ1W-AD/DA/MAD
CJ1W-ETN21 (100Base-TX)
MF8300C/MF8000C Series MF Driver Installation Guide
CS1D-ETN21D Operation Manual
"user manual"