Download Codecs & wrappers / cont

Prefs tab / - cont...
392- system
393- use old drive
mapping
Location
“5.26 Prefs tab” on
page 181
“5.26 Prefs tab” on
page 181
“5.26 Prefs tab” on
page 181
395- ip address
“5.26 Prefs tab” on
page 181
396- support info
“5.26 Prefs tab” on
page 181
It is recommended to properly close the Cinedeck application before restarting or
shutting down your system. Pressing “restart” or “shut down” provides easy access to
closing the Cinedeck application before automatically restarting or shutting down.
If your system is busy recording or playing, most settings on the “prefs” page
will not be available. Stop all activity on all channels to restart or shut down.
First generation MX systems utilize a different drive connection scheme which will
result in connected SSDs to be improperly listed in the user interface. If you find
the position display on your MX of your installed SSD drives does not match their
actual position, this function should be turned on. For additional information, contact
support. See “Contacting Cinedeck” on page 2
Settings on the “prefs” page are all independently saved when pressed. Click “save
and close” to close setup and go back to the main screen.
The current IP addresses for the Cinedeck system are displayed here. If multiple LAN
connections are available, they will all be listed.
The phone number for Cinedeck support and the current software version are
displayed here. Please see “Contacting Cinedeck” on page 2 before calling.
Prefs tab
394- save and close
Description
User Interface
Name
-
Cinedeck USER GUIDE - Cinedeck Version 4.5 13666 – August 27, 2015 - 14:28
Page - 186 of 304