Download Codecs & wrappers / cont

FAQ > Features / - cont...
(note: In some instances, internal recording of RAW or full 4K and UHD may require setting SSDs into a RAID configuration. Additional
information will be available with the 4K releases.
1 - Optional on all systems. Support on ZX20 and RX3G is for 4K / UHD playback only up to 30P
2 - ZX40 and ZX45, ZX20 supports playback only of a single channel of 4K / UHD up to 30P
3 - Final development and release of raw recording is on hold
FAQ & Features
 Streamable h.264 files which can be delivered live by a streaming server
10.6. AES Audio:
RX3G (and newer) recorders can accept 8 AES audio channels per input pair with the ability to selectively toggle on & off and map
the destination channels. All 8 can be received by both video inputs. MX has an optional additional 16 channels of AES which can
be activated in an upcoming release for a total of 32 AES inputs.
For legacy analog audio situations, probably the best and often lowest cost solution is to use an analog to digital AES adapter.
There are many on the market but one example is the AJA ADA4 4-Channel A/D & D/A Converter. Cinedeck (RX and newer) decks
also support the Scarlett 2i2 USB audio interface from Focusrite which provides two mic/line balanced XLR / TRS audio inputs
through high quality preamplifiers. For scratch audio tracks, RX can also accept two channels of unbalanced audio via the rear line
level mini jack connection. Additional USB audio adapters with different input choices are being considered for inclusion in the
future.
FAQ > Features
10.7. Analog Audio:
10.8. Analysis Tools:
Cinedeck (RX and newer) decks provide digital peak audio meters, adjustable monitor levels and monitor channel selection as well
as a complete set of video analysis tools including;
Waveform
Vector scope
Histogram
1:1 pixel picture zoom
Adjustable video peak detect
Focus assist
User selectable aspect ratio, safe area and grid overlays.
-
o
o
o
o
o
o
o
10.9. Audio Delay:
Version 4.3 includes audio delay in milliseconds which can be added {per channel} to SDI, AES and Analog audio sources. Each
channel can be delayed up to 999 milliseconds.
Cinedeck USER GUIDE - Cinedeck Version 4.5 13666 – August 27, 2015 - 14:28
Page - 291 of 304