Download User manual - LUCKINSlive
Transcript
11. Network objects 11. 4. Logical Digital Output (LDO) Summary Logical Digital Output (LDO) points are used for executing drive commands such as RUN/STOP and reset. The APOGEE® FLN P1 card supports 16 different logical digital output points (15 among them are for drive control, one special point is reserved for maintaining compliance). The values of logical digital output points can be modified by write point or memorize point commands. Release commands will not cause the logical digital output points to automatically return to their pre-override values. LDO points do not support COV. Logical Digital Output (LDO) Summary Point Number 22 24 26 29 40 41 42 43 44 45 48 49 59 68 69 94 97 98 Point Name CMD FWD.REV CMD STP.STRT EXT1.2 CMD DAY.NIGHT DO 1 COMMAND DO 2 COMMAND DO 3 COMMAND DO 4 COMMAND DO 5 COMMAND DO 6 COMMAND RST RUN TIME RESET KWH LOCK PANEL FLN LOC CTL FLN LOC REF RESET FAULT MBOX READ MBOX WRITE Factory Default FWD STOP Reserved DAY OFF (1) OFF (1) OFF (2) OFF (2) Reserved Reserved NO NO Reserved AUTO AUTO NO DONE DONE Slope Intercept 0 0 ON (1) Text REV RUN OFF (0) Test FWD STOP 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 NIGHT ON ON ON ON ON ON RESET RESET DAY OFF OFF OFF OFF OFF OFF NO NO 1 1 1 1 1 0 0 0 0 0 FLN FLN RESET READ WRITE AUTO AUTO NO DONE DONE (1) If IO basic card (VW3A3201) has been inserted. (2) If IO extended card (VW3A3202) has been inserted. BBV10543 10/2010 33