Download DPX 4 / Fredia User Guide

DPX 4 User Guide
Chapter 8 – Technical Specifications
Working Environment
40 - 70% RH, non-condensing
Temperature
18 - 25 degrees C
Max Temperature Change
2 degrees C/hour, +/- 1 degree C/hour
Installation Requirements
80 cm wide door
MEDIA SPECIFICATIONS
Media
2 media rolls (2 is optional)
Media Type
DotPrint / Mitsubishi Silver Digiplate, with polyester base material
Thickness
0.2 mm/8 mill FR/FRM on media widths from 305 - 750 mm
Core Size
6"/152.4 mm (Specification 1620)
Media Width, Large
305 - 754 mm
Media Width, Medium
305 - 550 mm
Output Tray Capacity
40 maximum format plates 0.2 mm media
PROCESSOR SPECIFICATIONS
Tank Capacity Activator
Approximately 1.3 liters
Tank Capacity Stabilizer
Approximately 5.8 liters
Activator Coating Rate (ml/m2)
0.33 ml/m2 nominal
Maximum Replenishment Refill
Rate, Activator and Stabilizer
200 ml/min.
Stabilizer Circulation Rate
3.5 liters/min.
Heater for Chemicals
Heating element, activator, 150 watt cartridge
Heating element, stabilizer, 300 watt in-line (Auxiliary Thermal Control
hardware only)
Activator Temperature Control
25-40°C (33°C nominal)
Warm-up Time
Approximately 20 min. (nominal settings in an 18°C environment)
Replenishment Containers
3 x 10 liters, including water
50