Download Insert lead page her

3:
Installing MiniLumi and GelCapture
3
4
Follow the instructions in the window and click OK to start calibration.
To turn the Light Table OFF, switch the Epi UV/Trans UV switch and the Epi WL switch off, as
displayed in the image below.
UV & WL
switched OFF
5
The CCD Calibration Progress window appears and displays the Bias images and Dark images
calibration progress, while the system creates reference pictures for the CCD camera.
6
After calibration is completed, the GelCapture successful calibration window will be
displayed.
Ready to Start
Your MiniLumi system is now set up and ready for use. The following chapter will provide detailed
explanations on how to operate the system. Read the rest of this guide before using your MiniLumi
unit. For your convenience, the system is provided with a Quick Reference Guide that includes the
operating instructions.
32