Download MFB for Modicon M340 using Unity Pro

IclA for MFBs
Hardware Requirements
References of the Hardware Used
The following table lists the hardware used in the architecture (see page 149),
enabling implementation of IclA MFBs in Unity Pro.
Hardware
Reference
Modicon M340 PLC
BMX P34 2030
Modicon M340 power supply
BMX CPS 2000
Modicon M340 rack
BMX XBP 0800
CANopen SUB-D9-Way female connector (bended TSX CAN KCDF 90TP
at 90° + additional SUB-D9-Way connector to
connect a PC on the bus)
CANopen preassembled cordset with moulded
female SUB-D9-Way connectors at both end
TSX CAN CADD03
Dongle PCAN PS/2 for IclA Easy (parallel-to-CAN
converter)
IPEH-002019
CANopen cable
TSX CAN CA50
IclA servodrive
IFS61/2-CAN-DS/-I-B54/0-001RPP41
NOTE: The terminating resistor is integrated in the IclA and must be ON
(see page 155).
35013563 05/2010
151