Download G1047 - Neoptix
Transcript
6.4 Download files tool This tool can be very useful to download these types of file: • Status.txt: This is the status file described elsewhere in this document. It essentially gives an overview of all parameters of your system, which can easily be e-mailed or printed. See example below • Temperatures.tem: This is the current logging file for temperature information. When this files gets to 65,000 lines long, it will be archived by using the date and time at the time of the archive as a prefix to the temperatures.tem file, and a new current temperatures.com file will be open. This figure shows the download tool: When you download a file, its name is fixed. To avoid overwriting a file, it is suggested to rename the previously downloaded file first. Downloading large file can take some time… the download rate is approximately 1 kilobyte per second. 6.4.1 An example of status file Here is an example of a typical status file. The content of this file gives an instantaneous “picture” of your T/Guard system. When contacting Neoptix for support, try to email a copy of this file with your request. T/Guard TGL - Status Report 2013/12/20 09:04:13 Serial Number: TGL-007A Firmware version: 1.06 Hardware code: 1 Calibration date: 13/10/9 Up time: 2 days, 14 hours, 20 minutes, 34 seconds ----- Serial Interface ----Serial Hardware: RS485-4w Protocol: Neoptix Address Id: None Baud: 9600 Parity: None ----- Temperature Data Logging ----Logging Enabled: yes Logging rate: 600 seconds List of files: >temperatures.tem (89.216 KB) Total: 1 files, 89.216 KB Document no. G1047r03 Copyright Neoptix Canada LP 28