Download D400 Substation Data Manager

GE Energy
Setting
Description
Range
Default
Interrogation
Group
The interrogation group used for reporting this
information object.
Not Used
Group 1
…
Group 16
Not Used
Report Class
Specify if spontaneous events for this object are
reported as class 1 or class 2 messages. Applies
to unbalanced mode and spontaneous events
only.
Class 1
Class 2
Class 1
Time Tag
The type of time tag to use.
None
With Time Tag
With CP56 Time
Tag
None
Address
Read only.
N/A
N/A
IED
System Point Identifier. Consists of Home
Directory and Point Name. Based on selected DI
point from the Point Picker. Read only.
N/A
System
Assigned
Identifier
Point Name
Text description of the point in the Binary Input
map. Based on selected DI point. Read only.
Up to 128
characters
Assigned IED
point name.
Accumulator
Type
Specifies whether every change (transition) or
every pair of changes (pulse) in the monitored
accumulator point value increments the
reported count.
Pulse
Transition
Pulse
Accumulator
Return Type
Specifies whether the running or frozen
accumulator value is reported.
Running
Frozen
Running
Accumulator
Freeze
Specifies whether or not the master station is
allowed to freeze the monitored accumulator
point.
Enabled
Disabled
Disabled
Accumulator
Clear
Specifies whether or not the master station is
allowed to clear the monitored accumulator
point.
Enabled
Disabled
Disabled
Threshold
Specifies the minimum change in accumulator
value required to produce a spontaneous report
or event.
Only used when the Accumulator Return Type is
Running.
0 to 1000000
1
Per-Point Settings
100
SWM0066–2.75–0, General