Download Instruction manual

5
HFR
LFR
0
0
M:
RT
1
0
-2 The Beep Mat displays in graph mode are very usefull for surveys done
with ATV’s or snowmobiles. The parameters of the Beep Mat probe are
indicated on two lines. The first line indicates the conductor signal intensity
and the second line indicates the magnetic signal intensity.
_____________________
____________________G
-3 The Mag display indicates the azimut and the magnetic total field. The
magnetic north is indicated by azimut 0 E. The Mag sensor can be used as a
compass. The total field is indicated in gamma and the sensor can measure a
total field as high as 120,000 gammas.
AZ:
30 E
M:
1
TF: 58645
-4 The GPS display indicates latitude and longitude in degree minute or in
UTM according of the reference system used. To modify the reference
system, select DAT by pressing [MENU] and with arrow keys choose your
preference, for example WGS-84 (NAD83).
Y:
X:
46°46.37
M: 1
-71°20.71 180603 1424
GPS degree-minute
N:
E:
5182580
M: 1
320953 ZONE: 19T
GPS UTM
-5 The Date-Time-Battery display.
D: 14/01/06
T: 15:54:34
M:
1
BAT: 95%
2.3 Beep Mat Status
The [ON] key is not only used to turn the unit on; it is also used to put
the unit in one of the following four states: On, Initialization, Standby or
Off.