Download WANJet User Guide

Advanced Configuration
1.
97
Check the Syslog Server IP box and enter the IP address of the server that receives
WANJet Syslog data.
•
Select Application to store only the application error log on this server
•
Select All to store all error logs on this server
2.
Check the SNMP Server IP box and enter the IP address of the SNMP server to which the
WANJet sends error messages. For more information on viewing SNMP reports, see
SNMP reports on page 62.
•
Check the Enable RMON2 Logs box if you want to view RMON2 data. Choose either:
•
Raw WANJet to view RMON2 logs from before the WANJet processes your traffic
•
WANJet Data to view RMON2 logs after the WANJet processes your traffic.
For more information on viewing RMON2 reports, refer to RMON2 Reports on page 63.
3.
In the Community String field, enter the shared community string needed to access the
SNMP reports on WANJet.
4.
Click Save. The Syslog and SNMP page refreshes and your changes are committed to
WANJet.
F5 WANJet 3.1
User Guide