Download WANJet User Guide

130
DESCRIPTION
"Optimized traffic sent
from this NetCelera Box to other NetCelera boxes
today in MB (after NetCelera)."
::= { ncStatistics 4 }
TotalRecvBeforeNetCelera
OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Effective traffic received
from other NetCelera boxes
today in MB (before NetCelera)."
::= { ncStatistics 5 }
TotalRecvAfterNetCelera
OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Optimized traffic received
from other NetCelera boxes
today in MB (after NetCelera)."
::= { ncStatistics 6 }
LastSentBandwidthSavingPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Percent bandwidth saving on the traffic sent
to other NetCelera boxes during the last five minutes.
This value may be plotted to create a chart."
::= { ncStatistics 7 }
LastRecvBandwidthSavingPercent OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"Percent bandwidth saving on the traffic received
from other NetCelera boxes during the last five minutes.
This value may be plotted to create a chart."
::= { ncStatistics 8 }
LastSentBeforeNetCeleraRate
OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The rate of effective traffic sent
from this NetCelera Box to other NetCelera boxes in Kbps
(before NetCelera).
This value may be plotted to create a chart."
::= { ncStatistics 9 }
LastSentAfterNetCeleraRate
OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS current
DESCRIPTION
"The rate of real Optimized traffic sent
from this NetCelera Box to other NetCelera boxes in Kbps
(after NetCelera).
This value may be plotted to create a chart."
::= { ncStatistics 10 }
F5 WANJet 3.1
User Guide