1
Download GX Developer Version7 Operating Manual
Transcript
13 SETTING THE PARAMETERS PLC RAS MELSOFT I/O assignment WDT [Watchdog timer] setup WDT setting I/O assignment Set each unit loading status of the system. Make switch settings of the intelligent function module. Make WDT settings of the CPU. Error check Set whether the specified error is to be detected or not. Reserve the multiple CPUs. Operating mode when there is an error Standard setting Set the display mode of the CPU on detection of an error. Set the base model, power supply Constant scanning module model, etc. Set the constant scan time. Boot file Serial Boot file setup Set the boot-run file, etc. Baud rate Set the baud rate. Sum check Set the sum check. Transmission weight time Set the transmission wait time. RUN write setting Set whether online program change can be made or not. 13 - 10 13 - 10
