Download GX Developer Version7 Operating Manual

15 OTHER FUNCTIONS
MELSOFT
For Q/QnA series
The device range of the merge destination is the maximum points of the CPU
type of the merge destination project, and the range check by the device setting
of the parameter is not performed.
Also, the number of ZR devices merged is up to 32k points.
For label programming
• If label names overlap at the time of local variable merging, they are merged
according to the merge option setting.
• If the number of labels exceeds 5120 at the time of local variable merging, the 5121th
and latter labels are not merged.
If the program/local variable capacity for label programming is exceeded by
merging, the area in excess of the capacity is not merged.
10) Execute button
Click this button when the setting is finished.
When data are merged, the END instruction at any point in the program is
deleted automatically and an END instruction is inserted at the end of the
program.
[Setting Procedure]
1) When programs are merged in the entire range
1. Choose the data type to be merged.
2. Set the drive/path and project name of the merge source data from the
Browse button.
3. Choose the data to be merged at 5) from the data displayed at 3).
4. Repeat steps 1 and 2. When the data to be merged are all selected, set 8).
5. When the setting is over, click 10).
2) When programs are merged in the specified range
1. Choose the data type to be merged.
2. Set the drive/path and project name of the merge source data from the
Browse button
3. Choose the data to be merged at 5) from the data displayed at 3).
4. Repeat steps 1 and 2. When the data to be merged are all selected, set 8).
5. After selecting the program data to be range-specified from 5), click 6).
6. Click 6) to set the merge range.
(Range setting may also be made by double-clicking the data name at 5).)
7. Repeat steps 5 and 6 until the merge range is set to all files that need the
merge range setting.
8. When the setting is over, click 10).
15 - 5
15 - 5