Download Vista XM Series Technical Reference Manual

68
SYSTEM
High
I
Speed
2.
Message
Subacrlber
Msssaae
.I.
COMMUNICATIONS
Nle
Examples
Channel Number
1
Exr>lanatians
5.
At subscriir #5690. channels 2 and 5 go lnto
alarm (and inftiie a call) and channel 6, whii has
previously reported an alarm is still triggered.
Channel 2: NEW ALARM
Sa.
Channel 5: NEW ALARM
Channel 6: PREVIOUSLY REPORTED ALARM still in Sb.
effect)
5~.
Still at subscriber #5690, following the events of
example 1 above, channel 2 restores (initiiing the
5d.
call) and channels 5 and 6 remain in alarm:
Channel 2: NEW RESTORE
56.
Channels 5.6: PREVIOUSLY REPORTED
ALARMS still in effect)
51.
If a system trouble condffin OOCUfS,a separate
trouble message format exists as in the following:
For Loss of AC Reporting (Channel 1 is used)
For AC Restoral
For Low Battery Reporting (Channel 2 is used)
For Low Battery Restoral
For Program Tamper (Channel 3 is used)
For Power On Reset Reporting (Channel 4 is used)
3a. Subscriber #0135 bypasses faulted zone 3.
3b. Bypass restorals am transmltted when the restoral
takes place.
4a. If a trouble condition occurs in Zone 2 for subscr&r
115890. a trouble report is transmitted.
4b. Zone trouble restoral is transmitted as soon as tt
OCCUB.
ADRbfCO’x
VISTA
Xbf SERIES
TRCaNIcAL
RRFERRNCE
MANUAL
/h-.