Download User`s Manual - Rorke Data
Transcript
Rorke Data The following are common errors that may be encountered when running the Client: Error Message Reason/s For The Error Things You Can Do Input Read Stream Error • Communication between the Client and the other module is suddenly broken. • This is a network-related error. Just try to refresh and see if the operation is carried out. Just repeat again the command. [hostname] is a Daemon Server not a RAID Subsystem • An attempt to connect to an Galaxy HDi is made when hostname and port number specified is not an Galaxy HDi AVC-L • Verify that you are connecting to the correct hostname and port number. Connections to the Monitor Daemon and Galaxy HDi’s are different. [hostname] is not a Monitor Daemon • An attempt to connect to a Monitor Daemon is made when hostname and port number specified is that of a Monitor Daemon. • Verify that you are connecting to the correct hostname and port number. Connections to the Monitor Daemon and Galaxy HDi’s are different. • • 7.4 Galaxy HDi Status Change The following are possible status changes of Galaxy HDi. These information maybe logged in a log file or maybe send out as notifications in email, snmp trap, etc. Error Message Reason/s For The Error Things You Can Do Instant Copy Status Changed: Failed • Instant Copy operation wasn’t successful Confirm if instant copy source and target logical units exist and running. Array #: [old status] => Degraded Mode • Array became degraded maybe because a drive has failed. • Replace failed drive. Array #: [old status] => Reconstruction Mode • A drive belonging to this array is undergoing reconstruction mode. • No action required. Array #: [old status] => Retry Mode • A drive belonging to this array is undergoing retry mode. • No action required. Array #: [old status] => System Halt • When 2 or more drives belonging to the array have failed. • Confirm if wrong drives were replaced. If so, power off and replace drives then power on. Spare #: [old status] => Failed • Specified Spare drive has failed. • Replace failed drives. Spare #: [old status] => Offline • Spare drive was assigned as Offline. • No action required Spare #: [old status] => Missing • Spare drive was removed. • No action required. Spare #: [old status] => Reconstruction Mode. • Data reconstruction started on spare drive. • No action required. Spare #: [old status] => Retry Mode • The specified spare drive is undergoing retry mode. • No action required. Spare #: [old status] => Blank • Spare drive was assigned as offfline. • No action required. 157