Download GW2020 Series User Manual

21: Automatic operator selection
_______________________________________________________________________________________________________
mobile.@roaming_template[0].icmp_hosts=disable
mobile.@roaming_template[0].timeout=disable
mobile.@roaming_template[0].health_fail_retries=3
mobile.@roaming_template[0].signal_threshold=-95
mobile.@roaming_template[0].priority=5
mobile.@roaming_template[0].ifup_retry_sec=120
mobile.@roaming_template[0].ifup_timeout_sec=180
mobile.@roaming_template[0].defaultroute=yes
mobile.@roaming_template[0].sort_sig_strength=yes
The configuration file for package multiwan is stored at
/etc/config/multiwan
To see configuration file of mobile package, enter:
config multiwan 'config'
option enabled '1'
option preempt '1'
config interface 'main_voda'
option health_fail_retries '3'
option health_interval '3'
option timeout '1'
option icmp_hosts 'disable'
option priority '10'
option exclusive_group '3g'
option signal_threshold '-95'
option ifup_retry_sec '350'
option ifup_timeout_sec '180'
option manage_state '1'
The configuration file for package multiwan is stored at:
/etc/config/multiwan
To see the content of the package, enter:
_______________________________________________________________________________________________________
© Virtual Access 2015
GW2020 Series User Manual
Issue: 1.1
Page 166 of 317