Download 5.1 Programming the SMCS116SpW

Transcript
Astrium GmbH
Doc No: SMCS_ASTD_UM_116
Rev.:
1.2
Date:
16.06.2008
Page:
76 of 157
SMCS116SpW
User Manual
Address
0x1A
Register
F_RCV_CTRL
Description
r/w
FIFO I/F Receive Control Register
r/w
old SMCS116 mode
F_CTRL bit D4 = '0'
new SMCS116SpW
F_CTRL bit D4 = '1'
D0:
Receive START/STOP bit
0: Stop receive from SpW
I/F
1: Start receive from SpW
I/F
D0:
Receive START/STOP bit
0: Stop receive from
SpaceWire I/F
1: Start receive from
SpaceWire I/F
D1:
External data bus width:
0: 8 Bit
1: 16 bit
D1:
External data bus width:
0: 8 Bit
1: 16 bit
D2: Receive mode:
0: do not stop receive on
EOP/EEP
D2: Write EOP/EEP mode:
0: write the received
EOP/EEP to the external
or internal (passive mode)
FIFO
1: write NOT the received
EOP/EEP to the external
or internal (passive mode)
FIFO
1: stop receive on
EOP/EEP and reset bit D0
D3: External control and
status signals:
0: enable
1: disable 3)
D3: not used
D4: EOP Status: (readonly, reset with the next
packet):
0: no EOP received
1: EOP received
D4: EOP Status: (readonly, reset with the next
packet):
0: no EOP received
1: EOP received
D5: EEP Status: (readonly, reset with the next
packet):
0: no EEP received
1: EEP received
D5: EEP Status: (readonly, reset with the next
packet):
0: no EEP received
1: EEP received
D6: internal FIFO empty
Status:
0: not empty
1: empty
D6: internal FIFO empty
Status:
0: not empty
1: empty
D7: reserved
D7: reserved
– All Rights Reserved – Copyright per DIN 34 –