Download Vitals Reference Manual

Chapter 5, HC-100 Handheld Controller: Vitals Mobile Controller Operation
VITALS MOBILE CONTROLLER OPERATION
Vitals Controller
The Vitals Controller is the program for operating E.H.
Wachs valve operators. If using a cable connection, make
sure the control cable is connected to the serial port on the
controller and to the port on the valve exerciser. If using a
Bluetooth connection, make sure a Bluetooth module is
properly installed on the machine's electronic board and that
the Bluetooth settings on the controller device have been
properly set up.
1. On the Vitals Mobile screen, tap the Controller button.
E.H. Wachs Company
Part No. 79-MAN-04, Rev. B
E.H. Wachs "No-Assumption" Valve Exercising
When you run the valve operator in EXER mode, it uses
the "no-assumption" exercising protocol to determine
direction of valve rotation.
Refer to Appendix A for a
detailed description of the noassumptions protocol.
41