Download Technical reference guide ML6300

5. For paper with binding holes, see “Binding holes” on
page 201.
6. Printing accuracy is assured from 6.35 mm (1/4 in)
(inclusive) from each edge.
Multipart forms
B5, B4 and A4 are the standard paper sizes.
[All dimensions in mm]
Strong glue (1mm)
Paper insertion direction
From vertical line
to reference line
Reference lines
± 0.2 mm or less
A
1st character
(10CPI)
Printing area
L
B
C
Printing surface
DIMENSION
D
W
NAME
SPECIFICATION VALUE
W
Paper width
90 – 304.8 mm (3.54 – 12 in)
L
Paper length
70 – 364 mm (2.8 – 14.3 in) (Note 1)
A
Printing start
position
Variable by menu setting (Note 6).
2.12 mm (1/12 in) – 27.52 mm (13/12
in). Specify by 1/12 in.
B
Lower end of
printing area
6.35 mm (1/4 in)
C
Left end of
printing area
6.35 – 28.6 mm (1/4 – 9/8 in) for
paper width within 279.4 mm (11 in)
19.05 – 28.6 mm (3/4 – 9/8 in) for
paper width 304.8 mm (12 in)
D
Right end of
printing area
6.35 mm (1/4 in). 106th character
within specifications for dimension C.
NOTE
1. Paper longer than A4 paper (297 mm) exhibits reduced
paper loading performance.
Appendix D – Media specifications > 198