Download Returnstar Feedback Genius Edu

Click “Setting” button in the Setting and Query main interface to enter the System
Setting interface.
Caution:
When entering the System Setting interface, the system will automatically check the receiver.
If the receiver is not under the normal working state (the receiver is not well connected with
computer or power source), the system will prompt an error message.
System Setting includes: Hardware Test, Remote ID Sett, Data Manage, Student Set,
Teacher Set, Subject Set, System Set, etc.
4.1.1 Hardware Test
On the System Setting interface, select “Hardware Test”, as follows:
The working performance of the Receiver, Teacher Remote Controller and Student
Remote Controller can be tested in Hardware Testing. All details of the testing process
are listed in this menu. If the receiver works normally, then the keys on Teacher
Remote Controller and Student Remote Controller should also function. Any problem,
please refer to “Chapter Five – FAQ” on this user manual.
4.1.2 Remote ID Set