Download Positioning ACU

JOG mode via keypad can be activated:
•
•
Navigate to the CTRL menu.
Actuate the ENT-key. Signal CTRL flashes.
•
Actuate the ENT-key again to reach the local operation
mode (stopped).
•
Use the FUN-key to travel with Jog-Speed Keypad 1174.
While the key is actuated the drive runs. If the key is not
actuated any more the drive will be stopped at the deceleration ramp.
Use the ENT-key to change the direction of rotation. The
direction of rotation is indicated at the display via an arrow and „F“ (Forward) or „R“ (Reverse). The direction of
rotation can be changed at standstill or during travel operations.
•
Warning!
80
The RUN-key of the keypad allows manual operation in all configurations. This manual operation uses the fixed speed as the reference value. Direction of rotation and travel speed of both modes can be different. If you use the manual operation pay attention to the parameter
settings.
Application manual Positioning
04/08