Download EN / ACSM1 Speed and Torque Control Program
Transcript
97 -10…10 V Maximum AO2 output value. 15.10 AO2 MIN FW block: AO2 (see above) Defines the minimum value for analogue output AO2. 15.11 -10…10 V Minimum AO2 output value. AO2 MAX SCALE FW block: AO2 (see above) Defines the real value that corresponds to the maximum analogue output value defined by parameter 15.09 AO2 MAX. AO (V) AO (V) 15.09 15.09 15.10 15.10 15.12 -32768…32767 15.12 AO2 MIN SCALE 15.11 AO (real) 15.11 15.12 AO (real) Real value corresponding to value of parameter 15.09. FW block: AO2 (see above) Defines the real value that corresponds to the minimum analogue output value defined by parameter 15.10 AO2 MIN. See parameter 15.11 AO2 MAX SCALE. -32768…32767 Real value corresponding to value of parameter 15.10. Parameters and firmware blocks
Related documents
EN / Application programming for ACS850 drives application guide
PT / ACSM1 Speed and Torque Control Program FW E screen
ABB ACQ810 Firmware Software
EN / ACSM1 Speed and Torque Control Program Firmware Manual
IT / ACSM1 Speed and Torque Control Program FW G / screen res
ACS850 Standard Program Firmware Manual
the thesis
T-PDS Windows - inverter & Plc
DBM04 User`s Manual
Module Manual Elevator Project - Software Engineering PRJ32
TB-FMCL-LVDS Hardware User Manual
MP3 converter