Download Installation and Maintenance V1.7 20091022

Installation and Maintenance
Figure 4
Drawing of the backboard:
Nut:2-
780-61001
Figure 5
2.2 The Bracket
As shown in Figure 4, the bracket is used for fixing the installation plate to the pre-designed
column bar.
The bracket and installation plate are installed onto the square bar. When the screws are not
fastened, the bracket and the installation plate can slide in four directions. This is to allow precise
positioning of cabinets.
Drawing of the bracket:
780-61001
Figure 6
2.3 To install the positioning bar
Before installing any cabinet to the support structure, a positioning bar must be installed first so
4