Download User Manual - AvaLAN Wireless
Transcript
User’s Manual AW900mSPI "Properties", then "Device Manager" or run the Control Panel and choose Device Manager from the choices available there). In Device Manager under the Ports item, you should see a pair of USB Serial Ports with associated COM numbers. 3. If the USB Serial Ports are there, skip this step and go on to the next. If they are not and you are sure that the Evaluation Board is connected to a USB port on your PC, then download and install the latest driver from www.ftdichip.com. Go to that website and find the latest driver for your operating system and for the FT2232 series of chips. Install the driver following the instructions provided by them. 4. Go to the AvaLAN website and download the latest version of the software utility for this product: www.avalanwireless.com/sw/EVK_Utility.zip. (Follow this link, or use the navigation menu: avalanwireless.com > Support > Documentation & Downloads, choose AW900mSPI and the EVK Utility link.) Save the zip file wherever you like. When you extract the file, it will create a folder that contains three files: EVKUtility.exe, ZedGraph.dll and EVK.conf. The utility will run from any folder on your hard drive and requires no installation or registry modification. (The .dll must be in the same folder as the .exe.) 5. Run EVKUtility.exe. You should see a window similar to that on the following page. The application window has three tabs, with the "Boot Configuration" tab appearing first. Technical support (650) 384-0000 PAGE 33 www.avalanwireless.com