Download DFE32B PROFINET IO

Configuration via PROFIdrive Data Set 47
Structure of the PROFINET parameter channel
7.2.3
I
7
0
Addressing connected inverters
The structure of the DS47 data set defines an axis element. This element is used to
reach multi-axis drives that are operated via one PROFINET interface. The axis element
addresses one of the units connected via the PROFINET interface.
Addressing a
MOVIDRIVE® B
on the PROFINET
With the setting Axis = 0, the parameters of the MOVIDRIVE® B drive inverter are accessed. Since there are no drive units connected to the MOVIDRIVE® B, an access with
Axis > 0 is returned with an error code.
PROFINET
Controller
Cyclic OUT Data
PD
PROFINET
PD
Cyclic IN Data
Read / Write
Record
Axis = 0
62210AXX
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Manual – DFE32B PROFINET IO Fieldbus Interface
69