Download Process Visualisation JETTER VIADUKT with Message Editor

Chapter 2
Processvisualisation - VIADUKT 2
2.2.2 Dynamic objects
Objects are said to be dynamic, if one or more of their attributes can be
influenced from a PASE controller connected to the VIADUKT.
The objects VALUE, BARGRAPH and TEXT VARIABLE are dynamic by
definition. These objects can show the content of registers of the PASE
controller either as decimal value (VALUE) or graphically (BARGRAPH) or
as string (TEXT VARIABLE). Any object can be made dynamic by
applying the command DYNAMIC on it. These objects are then able to
change their colour dependent on some bit variable of the PASE
controller.
2.2.2.1 Value
This object displays the content of registers as a decimal numeric string.
The numerical value is refreshed continuously. Optionally, a value object
can be used to allow input of new values into the specified register by
the operator.
To define a VALUE object, the start point for the numeric string has to be
defined like the start point of a text string.
Now a window opens with the "Value parameters" label. Here the data
for dynamic definition has to be entered:
Register
number:
Page 14
Number of a register. The content of that register is
displayed continuously in automatic mode. Example: The
current position of axis 51 is to be displayed. In that
case enter 15109 in the register number field.
The register number can also be defined indirectly in the
same sense as in a PASE controller. To use this feature,