1
Download Fault Detector Specifications
Transcript
2.1. Main window To stop the program, the top red right X button of the SENSOFT window is used. After stopping the program, the main window remains opened, but the upper Arrow (see figure 2.1.1) on the left turns white. When the SENSOFT is stopped, the time indicator is not updated any more. By clicking on the Arrow button (Run) the SENSOFT is started again. When the SENSOFT is opened, all the control values and configuration parameters (see section 3) are set to their default value. If any control value or configuration parameter is modified, the changes will be lost when exiting the SENSOFT. “Save“ mode: automatic data saving “Do not save“ mode: no data saving (see Section 2.3) Time display Line speed Filament length to be measured. Continuous visualisation of the length of the measured filament from start [m] Start/Stop measurement Each sensor head has its own alarm icon. When a defect is larger than any of the threshold values, the green icon turns red and the corresponding data is stored automatically in a file. (see Section 2.3). The icon can be clicked to open a window with signals visualisation. Figure 2.1.1: View of the SENSOFT main window display Parameter/Value Function/description default setting Nominal diameter: Nominal diameter of the filament 40 µm Lump Threshold: If the LU signal exceeds this threshold value, the fault is recorded 4 µm NeckDown Threshold:: If the NE signal exceeds this threshold value, the fault is recorded (the NeckDown is disabled) 4 µm AC sigma threshold: If the AC signal standard deviation exceeds this threshold value, the fault is recorded 1 µm Speed Speed of the filament. This value is used to calculate the filament position 100 m/min Length Filament length to be measured. After measuring the defined length, the measurement stops automatically. For a continuous measurement the value is set to 0 0m Pos. Indicator of the number of meters of filament measured since the beginning of the measurement 3 SENSOPTIC S.A. • 6616 LOSONE • SWITZERLAND • WWW.SENSOPTIC.CH • [email protected]
