Download NPS2400
Transcript
6 User interface 6.1 Principles of operation An integrated user interface composed of an LCD (alphanumerical, 2 x 16 characters, with backlight), 2 status LEDs and 4 buttons is present on the NPS2400. Through this interface the user can modify, monitor and control the SMPS behaviour. The physical layout of the interface is shown in Figure 14. Figure 21 RED LED GREEN LED User interface physical layout MENU KEY Used to enter and exit various pages in the user menu. DOWN KEY Scrolls down menus and values. UP KEY Scrolls up menus and values. OK KEY Confirms selection ALARM Shows an abnormal condition (either external or internal to the SMPS) DC OK / CHARGE 1. in power supply modes: shows that the device is operating correctly and the output voltage is regulated 2. in battery charger mode: blinks (1Hz) during charging and turns ON when the battery is charged NPS2400 User’s Manual Rev. 3.0 – 17.02.2015 Page 21/38