Download Panasonic Heat Pump Simulation Software Aquarea Designer

- 35
Please note: Weather data of locations stored in the program database are not displayed.
Country
You can use this selection list to filter the displayed locations by country.
The associated country of a location is found in the location's name (you have to consider this, when creating new
climatic locations on your own). The country's signature stands in parenthesis and is equal to the international country
abbreviation on cars.
Here are some examples:
(D)Germany
(A)Austria
(CH)Switzerland
(IRL)Ireland
(IT)Italy
(EST)Estonia
(LV)Latvia
(LT)Lithuania
(FIN)Finland
(N)Norway
If none of these country characters are found in the name, the location is only shown if you select show all locations or
locations without country code.
Zip code
You can use this list to filter the displayed locations in addition to the country selection by their zip-code. (A change in
the country selection resets the zip-code selection to all.)
The zip-code is extracted from the name of the location (you have to consider this, when creating new climatic locations
on your own). The extraction works this way: The first digit in the location's name is interpreted as the beginning of the
zip-code..
Examples for location names which are associated with zip-code 2...
Exampletown_24655_temperatures
224-Examplecity_(IRL)
20xxx_Examplevillage_in_the_year_2002
(If you want to have a year number in the location's name, it should not be the first number. Otherwise it is interpreted as
a zip-code.
New location
Press this button to create a new weather location.
Drop down list with location names
Select a location from this list.
“Outdoor temperature ... at .... days”
First select an outdoor temperature from the drop down list, then enter the number of days per year having this
temperature as daily average temperature (for the selected location).
Fig. 28: Weather data