Download Xen User Manual

Bottom Tim er
User M anual
How To Connect the XEN PC Interface To Your Computer
Connect the USB cable provided to your PC
and to the PC Interface
At this point, you should get a message “New
Hardware Detected”
Place the XEN unit on its side, with the PC
interface aiming for the eight holes on the
backplate
The distance from the PC interface to the XEN
should be 2-4 cm or 1-2 inches
How To Launch A Dive Log Download
You can download your dive logs onto your Computer, either by using the Liquivision Dive Logger or
any other available dive logging program that supports downloading logs from your XEN bottom
timer. To download your dives, first:
Make sure the XEN FTDI drivers have been installed on your computer (applies to Windows users
only) (Instructions).
Make sure the Liquivision Dive Logger has been installed on your computer (Instructions).
Then launch the Dive Logger program by double-clicking on the shortcut on your PC desktop
(Windows) or by selecting it in your Applications Folder or your Launchpad (Mac OS X).
Make sure the XEN PC Interface is properly connected to your computer (Instructions).
Then, pretty quickly:
Pick up your XEN and turn on its wireless transmitting function:
o tap it three times to wake it up
o tap it three times again to enter menu mode
o tap down through the menu options until you reach “Connect To PC”
o tap the side of your XEN to select this option
o you will see a message “WAIT FOR PC”
Replace your XEN in alignment with the PC Interface.
Return to the Dive Logger Software and turn on its transmitting function:
o Select “Computer” from the top menu
o Select “Connect”
You should see a window like this pop up:
Li q uivisio n Pro d u c ts, In c
V A N01: 2867494: v2
-51-
R e visio n 3.1 (softw a r e 2.25)