Download USER MANUAL

Transcript
ENGLISH
MAIN MENU AND ACCESS LEVELS
Beside the display, there are 6 buttons 3 (3 on the left, 3 on the right) to select the
correspondent displayed options.
The ESC 2 button (below the display, on the right) allows to quit the displayed menu.
1
4
2
5
3
6
Turn and press the CONTROL SELECTION 4 encoder to select parameters and change
their values.
The software initial main menu is shown as MAIN in the top left-hand corner of the
display.
The complete menu path is indicated in the top of the display.
In the display bottom: the date (on the left), the time (on the right) and the access level at
the centre as follows:
-----
L1 (level 1): users not allowed to configure the system
L2 (level 2, password required): qualified personnel
L3 (level 3, password required): system administrators
L4 (level 4, RCF only): system maintenance
Enter the password in the SYS LOG > LOGIN menu to login and obtain privileges of either
level 2 or 3, in order to be allowed to enter other menus / parameters.
Use the SYS LOG > LOGOUT to logout.
ACCESS LEVEL 1 – USERS NOT ALLOWED TO CONFIGURE THE SYSTEM
-- Level that allows to enter only a software section, in which it is not possible to edit the
system configuration, for example (allowed operations):
-- Adjust the MASTER volume (BGM or PAGING)
-- Use the MP3 player
-- Read the system information.
-- The password is not required.
ACCESS LEVEL 2 – QUALIFIED PERSONNEL (password required)
-- Level that allows to (in addition to the level 1 functions):
-- See the system logs
-- Reset emergency events and faults
-- Set messages that can be quickly activated through the 6 display buttons.
21