No category

Download FriendlyNet book

Transcript

FriendlyNet book Page 3 Friday, December 4, 1998 10:58 AM
FriendlyNet PC Card User’s Manual
Software Installation - Windows NT 4.0
PCMCIA Services Verification
1 Before beginning installation of the FriendlyNet PC Card, make
sure that PCMCIA services are enabled on your computer.
2
Select Devices from the Control Panel as shown in
Figure 2-1.
Figure 2-1
3
Selecting Devices Icon in Control Panel
In the Devices Panel, scroll down the Device list to the
PCMCIA device. The Status should be Started and the
Startup Type should be Boot. If this is not how PCMCIA is
configured, click Startup, then set the Startup Type to
Boot and click OK.
Page 2-3

Related documents