Download ONT Release Notes - Viavi Solutions Inc.
Transcript
ONT Optical Network Tester Release 26.0.2, February 2015 Release Information February 2015 (26.0.2) Please direct all enquiries to your local JDSU sales company. The addresses can be found at: www.jdsu.com/test Copyrights This product or parts of this product are based on the Recommendations and/or Standards issued by the Standardization Sector of the International Telecommunication Union - ITU-T and/or the European Telecommunications Standards Institute- ETSI. These Recommendations and Standards are copyright to these organizations. ITU-T Recommendations or ETSI Standards may not be copied and/or made available to third parties in whole or in part without the written agreement of ITU-T and/or ETSI. © Copyright 2015 JDSU Deutschland GmbH. All rights reserved. JDSU and JDSU logo are trademarks of JDS Uniphase Corporation. Other trademarks are the property of their respective holders. JDSU Deutschland GmbH Mühleweg 5, 72800 Eningen u. A. Note: Changes may be made to specifications, descriptions and delivery information. Printed in Germany Release Information ONT Software Release 26.0.2 Recommended for all updates Congratulations on choosing the ONT Optical Network Tester. With its flexible 3-,6-,12-slot or rack-mount mainframes/module design the units offer true multi-port operation running tests on each of the modules simultaneously and independently. Modules are available for Ethernet / OTN / SDH / SONET / Fiber Channel / Jitter and Wander for the rates 111G (OTU4) down to 155M. With its deep digital and analog analysis capabilities the ONT sets the pace of testing new technologies. As all modules are plug-ins, easy upgrade makes the ONT the ideal choice to grow with your future needs. Focus has been given to easily integrate ONT into automated environments. Support of Tcl/Tk, C and LabWindows libraries, and Ethernet on the connectivity side and the Linux operating system minimize efforts controlling ONT remotely. Additional features of the ONT include multi-user access, open architecture for further applications, and rack mount ability. Content • • • Compatibility Information ONT - New Features History JDSU is continuously working on improvements and enhanced functions to provide you with the most reliable test solution for optical and next generation network elements and networks. Please visit our web site for more information about the ONT. http://www.jdsu.com/ont Software Update The new software can be ordered using the following order number: ONT-600 update set (disk) BN 3076/95.01 (free of charge). ONT-5xx update set (disk + USB stick) BN 3061/95.01 (free of charge). Important Operating Considerations Please read chapter 4 "Getting started" of the ONT Mainframe User Manual carefully before installing or operating the software. ONT - Release Information 26.0.2 1 Compatibility Information Compatibility Information This section describes important changes in the test-set behavior which should be considered before upgrading the software of a test-set. Release 26.0.2 • General - ONT-5xx Last feature release for ONT-5xx family Upcoming releases will no longer support the ONT-5xx family. • General Java version 1.8 now recommended Starting with release 26.0.2 the use of Java version 1.8 is recommended. Release 25.0.2 • General Java version 1.8 not thoroughly tested For the release of Java version 1.8 coincided with the completion of ONT Release 25.0.2, it is not thoroughly tested. Utilization of version 1.7 is still recommended. • Remote Control :PRES extension deprecated Re-setting block parameters to default values using the :PRES extension is no longer recommended. Extension behaves as before but will not be implemented or updated for new commands or modifications. • Tcl Driver Tcl & C remote control driver for SDH/SONET Multichannel Higher Order application consolidated Caused by the new SDH/SONET Multichannel Low-Order application, the previously Tcl and C remote control driver functions needed some consolidation. Some parts in the High-Order drivers (which were there in preparation of lower order) have been removed as they are now included in the Low-Order specific drivers. Release 22.0.2 • General - All layered OTN applications APS/PCC multi-frame default values changed to all zero to ensure compatibility with deactivated multi-frame mode • MTM 4s4x - OTN EFEC application Load of EFEC I.7 application defaults EFEC I.7 now instead of standard RS-FEC 2 ONT - Release Information 26.0.2 Compatibility Information Release 21.0.2 • 100G CFP2 - Loading saved applications Applications saved with version 20.0.x can't be loaded with version 21.0.2 • General - Java WebStart not working properly The latest Oracle Java 7 runtime environments (at least 1.7.0_25 and 1.7.0_40) have an open issue with the start of WebStart application. As this is also impacting the start of the ONT user interface JDSU has implemented a workaround to allow customers to run the ONT GUI with the above JRE versions. This workaround leads to slower startup times of the GUIs, we apologize for the inconvenience caused by this issue. We will remove the workaround when a bug fixed version of the Java runtime environment is available. All ONTs in your network shall be updated to 21.0.2 before Java 1.7.0_25 or 1.7.0_40 is activated. Release 19.0.2 • General - All SDH/SONET single-channel layers Default behavior of measuring positive/negative pointer justification events (PJE) has been changed Pointer justifications are no longer treated as an error condition resulting in a "red" layer and overall status, as they are part of a normal system behavior. Events are still counted and put into the event list as before. The previous behavior (PJE are causing "red") however can be activated by setting the "Process PJE as error" setting on the pointer GUI-page. • General - Remote Operation ONT Scout requires Java version >= 1.6 in order to function properly Java 1.5 is no longer supported. Release 18.0.2 • Remote Control - All OTN/ODU/SDH/SONET layers Event id changed Due to a double assigned event id number for the remote control access of the event list, the number for the "max. Event Limit" has been reassigned to value 123. • Module E - ALL Tab Access to the signal structure "PCS [64B/66B] BERT" The access to the signal structure "PCS [64B/66B] BERT" via the node "FC" is no longer supported. Please use the access via node "LAN" ONT - Release Information 26.0.2 3 Compatibility Information Release 17.0.2 • MTM 4s4x - Fallback position Update fallback position Due to major firmware changes it is recommended to switch fallback position to release 17.0.2 after successful verification of the MTM functionality. Switching back to a release prior to 17.0.2 may lead to update problems. • General - All SDH / SONET Layers Loss of pointer (LOP) detection adapted To reduce incompatibility of the ONT with other JDSU test equipment (MTS) the behavior of the loss of pointer (LOP) detection has been adapted for all layered SDH/SONET applications. The SS bits are now ignored by default for the LOP alarm detection. If the previous behavior is required the "ignore SS-bits" setting can be changed. Release 15.0.2 • Remote Control *IDN? The instrument"s response to "*IDN?" has been harmonized. Release 13.0.2 • General OSA Module no longer supported The OSA Module is no longer supported. Please do not update a mainframe containing an OSA Module to software release 13 or higher. • Remote Control GPIB no longer supported Remote control via GPIB is no longer supported. • General 10GigE LAN / WAN Module (Module A) no longer supported The 10GigE LAN / WAN Module (Module A) is no longer supported. Please do not update a mainframe containing a 10GigE LAN / WAN Module (Module A) to software release 13 or higher. Release 12.0.2 • General Reloading of previously (with older firmware versions) stored OTN containing applications may lead to error logger messages Due to many feature enhancements compared to previous firmware versions, older applications may not be loadable anymore. In case of an error logger occurring while an old setup is loaded, the reloaded application may be corrupted and should be deleted. • 100GE / 40GE MAC/IP: Traffic is now enabled by default Traffic is now enabled by default. 4 ONT - Release Information 26.0.2 Compatibility Information • Jitter / Wander (ONT-5xx only) - TIE - MTIE / TDEV Analyzer (BN 3068/95.21) Change of TIE data format requires new Wander Analysis software (BN 3061/95.98) A new disk-space optimized TIE data format is implemented for 10 / 11G and 40 / 43G Wander applications. The new TIE format cannot be read by TIE - MTIE / TDEV Analyzer (BN 3068/95.21) software. For PC-based TIE analysis, the new Wander Analysis software (BN 3061/95.98) Release 2.0.0 or later is required for reading the new data format. See the Tools page on the Value Disk for details. Release 10.0.2 • 100GE / 40GE Software downgrade requires service assistance 100G modules once updated to 10.x.y can't be downgraded without service assistance. Those modules will not work in mainframes running software releases < 10.0.2. Release 9.0.2 • 40 / 43G ODU2 default stuffing when multiplexed into OPU3 has been changed Starting with software version 9.0.2 the ODU2 default stuffing when multiplexed into OPU3 has been changed according to the current G.709 standard. An additional setting "legacy stuffing" has been added to the multiplexing configuration pages to allow mappings prior to G.709/Y.1331 (2003) Corrigendum 1. Release 7.1.2 • General Save/Load - Results Manager Currently, the software offers two ways to deal with settings and results: • • Using the application internal Results Manager accessible via the "Save/Load" chapter Using the "Applications ..." part of the ONT-5xx main menu Please be aware of the fact that using the "old style" Results Manager is deprecated. The chapter is going to disappear in the course of time. In order to preserve old style settings and results, please load using the "Save/Load" chapter and save via the main menu. • Remote Control Information about modified/deprecated remote commands Remote Commands may have been changed or are deprecated with this software release. ==> Please correspond to the appendix of the Application Command Reference documentation for details about changed/deprecated commands. • Module E - RFC 2544 Opening a user application created with a software version < 7.1.2 As some result graphics are added in version 7.1.2 and did not exist in earlier software versions the data is not completely available when a user application created with a software version < 7.1.2 is loaded. The graphics may then look somewhat unusual and may not display the result data in optimal scaling. Please refer to the table results. ONT - Release Information 26.0.2 5 Compatibility Information Release 6.0.2 • 40 / 43G - Test automation 40 / 43G Drivers In order to harmonize drivers, names of driver function names (C / CVI and Tcl) have been modified by changing the instrument prefix / name space from "ont" to "ont_". Additionally some function names - especially in the OTN layer - have been modified. Please refer to the driver documentation. • DSn / PDH (ONT-5xx only) - Test automation PDH Driver In order to harmonize drivers, names of driver function names (C / CVI and Tcl) have been modified by changing the instrument prefix / name space from "ont" to "ont_". Additionally some function names have been modified. Please refer to the driver documentation. 6 ONT - Release Information 26.0.2 ONT - New Features ONT - New Features The following enhancements are included in the new software release. General • New controller CPU plus updated Linux operating system • ONT Scout: Enhanced reporting and filtering capabilities ONT Scout now directly shows more detailed usage information of specific application ports. Filtering on specific states has been added as well. • Condensed application layer reports Application measurement report generation now supports condensed reporting on a per layer basis to shorten overall report size. Tcl Driver • 64 bit TcL Libraries TcL Libraries are now available for 64 bit operating systems (Windows and Linux). 100G CFP2 • New hardware option (BN 3076/92.93): CFP2-to-QSF28 adapter for the CFP2 module Adapter for all variants of the CFP2 module supporting 25G and 28G QSFP28 optical transceivers. The adapter can be used in both transceiver slots of the CFP2 module. Supports all physical layer hardware test and validation options available for the ONT CFP2 module. Special I2C debug functionality. Supports all available ONT CFP2 module 100G protocol layer applications (Ethernet/ IP, OTN). • New single-port mode option (BN 3076/94.35): IEEE 802.3bj Reed-Solomon Forward Error Correction (clause 91) advanced test and analysis This option supports in depth testing and analysis of Reed-Solomon Forward Error Correction (RSFEC) implementations in accordance with IEEE 802.3bj (clause 91, KR4 FEC) and IEEE 802.3bm. User selectable FEC lane mapping. Complete error analysis including per FEC lane results and guaranteed bit error rate estimation. Analysis and manipulation of alignment marker sequences. Rx alignment marker payload sequence capture. Various FEC error generation modes including burst, user symbol mask and automatic FEC stress test. Rx lane skew measurement. Static and dynamic TX lane skew generation. This option requires "IEEE 802.3bj Reed-Solomon Forward Error Correction (clause 91) basic functionality ("SR4 FEC")". • IEEE 802.3bj Reed-Solomon Forward Error Correction (clause 91) basic functionality Full-fledged 100G Ethernet/IP application with reconciliation sublayer and Reed-Solomon Forward Error Correction (RS-FEC) sublayer. Multi-flow MAC/IP layer with multiple traffic profiles. RS-FEC sublayer in accordance with IEEE 802.3bj (clause 91, KR4 FEC) and IEEE 802.3bm. RS-FEC sublayer provides basic error generation and analysis capabilities. Supports CFP2 module singleand dual-port modes. Per physical lane random bit error generation with Poisson error distribution (single port mode only). • New single-port mode option (BN 3061/94.80): OTN: 40G Ethernet client mapping in OTU4 via ODU3 40G Ethernet client mapping in OTU4 via ODU3. Implementation in accordance with ITU-T G.709. Full-fledged multi-flow/multi-traffic profile MAC/IP layer. Reconciliation sublayer with deep test and analysis functionality. ONT - Release Information 26.0.2 7 ONT - New Features 8 • Jitter Modulation Calculator Calculator tool to calculate required frequency and phase modulation of an external reference clock in order to achieve a wanted amount of jitter on the line interface. • New single-port mode option (BN 3061/94.67): OTN: 40G Ethernet GFP-F mapped into OTU3ODU3/flex This option enables the frame based GFP mapping of Ethernet traffic up to 40Gbps into ODU3/flex. GFP layer with deep test and analysis functionality. Full featured multi-flow MAC/IP layer with multiple traffic profiles and capture. • New single-port mode option (BN 3061/94.68): OTN: 10G Ethernet client mapping in OTU3/ OTU3e1/OTU3e2/OTU4 via ODU2e 10G Ethernet client mapping in OTU3/OTU3e1/OTU3e2/OTU4 via ODU2e. Implementation in accordance with ITU-T G.709. Full-fledged multi-flow/multi-traffic profile MAC/IP layer. Reconciliation sublayer with deep test and analysis functionality. • New single-port mode option (BN 3061/94.69): OTN: Transparent 10G GFP-F mapping This option enables the GFP-F mapping "Transporting Ethernet 10GBASE-R payloads with preamble transparency and ordered set information" in accordance to ITU-T G.7041 chapter 7.9 into ODU2 into OTU3/OTU3e2 and OTU4. GFP layer with deep test and analysis functionality. Full featured multiflow MAC/IP layer with multiple traffic profiles and capture. • New single-port mode option (BN 3061/94.70): OTN: ODU0 - GFP-T with a 1G Ethernet Client for OTU3/OTU3e2/OTU4 This option enables the GFP-T mapping of 1G Ethernet into ODU0 into OTU3/OTU3e2 and OTU4 in accordance to ITU-T G.709. GFP and PCS layer with deep test and analysis functionality. Full featured multi-flow MAC/IP layer with multiple traffic profiles and capture. Support of OTN multi-stage via ODU1/ODU2 (option dependent). • New single-port mode option (BN 3061/94.76): OTN: STM-256/STS-768 client generation/ analysis into OTU3 SDH/SONET 40G clients into OTU3 signals can be generated and analyzed with full feature set as for 40G line rate. • New single-port mode option (BN 3061/94.79): OTN: SDH/SONET Client via ODU3 into OTU4 SDH-256/STS-768 support as generated/analyzed client over ODU3 multiplexing into an OTU4 signal. • New option (BN 3061/94.82): OTN: Multi-stage ODU multiplexing via ODU3 into OTU4 Add multi-stage ODU multiplexing via ODU3 into OTU4 rate. OTU4-ODU3-ODU0, OTU4-ODU3ODU1, OTU4-ODU3-ODU2, OTU4-ODU3-ODU2e, analysis and generation is supported for BULK and SDH/SONET clients. All above are dual-stage multiplexing structures, but triple/quad stage is also supported. • New single-port mode option (BN 3061/94.78): OTN: 100G Ethernet GFP-F mapped into ODU4 This option enables the frame based GFP mapping of Ethernet traffic up to 100Gbps into ODU4/flex. GFP layer with deep test and analysis functionality. Full featured multi-flow MAC/IP layer with multiple traffic profiles and capture. • New single-port mode option (BN 3061/94.82): OTN: BULK Client via ODU3 into OTU4 BULK support as generated/analyzed client over ODU3 multiplexing into an OTU4 signal. • New single-port mode option (BN 3061/94.82): OTN: ODUflex(1-32TS) BULK via ODU3 into OTU4 ODUflex (1-32TS) BULK support as generated/analyzed client over ODU3 multiplexing into an OTU4 signal. ONT - Release Information 26.0.2 ONT - New Features 100GE / 40GE • Jitter Modulation Calculator Calculator tool to calculate required frequency and phase modulation of an external reference clock in order to achieve a wanted amount of jitter on the line interface. Module E • New option (BN 3061/93.42): 1/2/4G Fibre Channel on Module-E This option enables 1/2/4G FC with the feature-set as provided on the MTM blade. • OTN: Drop and insert of selectable GCC overhead traffic Enhances option 3061/93.64 "OTN Control Plane Enhancements". This option enables access to HDLC encapsulated data over the TX and RX GCC channels of the OTN overhead. An external client can now connect to the ONT and transmit and receive data frames over a GCC channel. Note: External client access is currently supported for ONT600 Module E only. The ONT delivery does not include an external client application. MTM • Different services on MTM added in "mixed port loading mode" This feature now allows different ("mixed") services on the coupled ports (1&2 and 3&4). When in "Mixed Port Loading Mode" e.g. port1 may run OTN-BERT while port2 runs SONET/SDH or 10GE LAN. Different combinations are supported including lower-rates SONET/SDH/OTN. The previous pure "port loading mode" remains the same and offers always the same service on the coupled ports. • Increase max. TX offset to +/- 1000 ppm Extend MTM/MTM-B PHYS TX offset-range to +/- 1000ppm. ONT - Release Information 26.0.2 9 History History This section provides information related to the past releases. Release 25.0.x 2014-10-30, Recommended for all updates General - ONT-600 only Feature enhancement Each layer GUI and each main chapter of any layer GUI can be duplicated into a new window 100G CFP2 - OTN Layer New option (BN 3061/94.73) ODU Multi-Channel support on CFP2 for OTU3+OTU4 rates 100G CFP2 New option (BN 3076/94.36) MLG 1.0 support for test & validation of MLG components 100G CFP2 New option (BN 3061/94.84) IEEE 1588 (PTP) master/slave emulation and monitor 100G CFP2 New option (BN 3061/95.99) Wander Analysis Software for PC (Packet data add-on) 100G CFP2 - OTN Layer New option (BN 3061/94.77) 1G/10G Ethernet GFP-F mapped into ODU0,1,2-->OTU3/OTU3e2/OTU4 100G CFP2 - OTN Layer Feature enhancement Configurable ODUflex rates for GFP-Mappings 100G CFP2 - ODUMC Layer Feature enhancement Edit field to set the TUG time-slot start position 100G CFP2 - ODUMC Layer Feature enhancement TUG RX port number of non-analyzed channels can now be set 100GE / 40GE - ONT Layer Feature enhancement Configurable ODUflex rates for GFP-Mappings 100GE / 40GE - ODUMC Layer Feature enhancement Edit field to set the TUG time-slot start position 100GE / 40GE - ODUMC Layer Feature enhancement TUG RX port number of non-analyzed channels can now be set Module E - SDH/SONET Layer New option (BN 3061/93.38) New lower-order Multi-Channel capable application Module E Feature enhancement User definable MAC/IP packet payload Module E Feature enhancement Single button 10GE PCS error propagation (/E/) error generation MTM - MAC Layer New option (BN 3076/63.13) ESMC message analysis and generation MTM Feature enhancement User definable MAC/IP packet payload 10 ONT - Release Information 26.0.2 History Release 25.0.x 2014-10-30, Recommended for all updates Feature enhancement MTM Single button 10GE PCS error propagation (/E/) error generation MTM-B New modules (3076/12 and 3076/60.12) ONT-601 MTM-B and module MTM-B Release 24.0.x 2014-06-05, Recommended for all updates Feature enhancement General Configurable report content Feature enhancement General Possibility to delete customer data from ONT-600 modules Feature enhancement General Enhanced readability and configurability of ONT Scout Export file 100G CFP2 New option (BN 3076/94.40) Enable more BULK enhanced muxing stacks in dual-port mode 100G CFP2 New option (BN 3061/94.61-63+65+66) OTN: Add ODU2/1/0 multiplexing into OTU3 rates for BULK/SDH/SONET clients 100G CFP2 New option (BN 3061/94.64) OTN: Bulk in ODUflex multiplexing into OTU3/OTU4 Feature enhancement 100G CFP2 Software support for option BN 3076/92.92 (CFP4 pluggable adapter to fit in CFP2 slot) Feature enhancement 100G CFP2 MAC/IP traffic generator control from the status overview panel Feature enhancement 100G CFP2 User option to automatically link MAC/IP traffic generation with measurement START/STOP 100G CFP2 New option (BN 3076/94.30) Hardware validation option for the single & dual port version of the CFP2 module 100GE / 40GE Feature enhancement Enhanced MAC/IP flow and traffic profiles in the OTU4/ODU4/GFP-F/MAC/IP application 100GE / 40GE Feature enhancement OTN: ODUflex(1-32TS) BULK via ODU3 into OTU4 100GE / 40GE Feature enhancement ODU-MC: Add MSI-mismatch alarm detection 100GE / 40GE Feature enhancement ODU-MC: Add OMFI generation/analysis for ODU-Multi-Channel into OTU4 mappings 100GE / 40GE New option (BN 3061/94.83) 100G MPLS/IP in GFP-F in ODU4 ONT - Release Information 26.0.2 11 History Release 24.0.x 2014-06-05, Recommended for all updates 100GE / 40GE Feature enhancement MAC/IP traffic generator control from the status overview panel 100GE / 40GE Feature enhancement User option to automatically link MAC/IP traffic generation with measurement START/STOP 100GE / 40GE Feature enhancement Software support for option BN 3061/92.90 (CFP to CFP2 LR4 active adapter in ONT CFP Module) Module E New option (BN 3061/93.40) Packet over SDH/Sonet (POS) for 2.5G and 10G Module E Feature enhancement MAC/IP traffic generator control from the status overview panel Module E Feature enhancement User option to automatically link MAC/IP traffic generation with measurement START/STOP MTM 4s4x Feature enhancement EFEC I.7 Random Error Insertion Enhancements MTM 4s4x Feature enhancement EFEC I.4 Random Error Insertion Enhancements MTM 4s4x Feature enhancement MAC/IP traffic generator control from the status overview panel MTM 4s4x Feature enhancement User option to automatically link MAC/IP traffic generation with measurement START/STOP MTM 4s4x Feature enhancement 1/2/4/8/10G Fibre Channel on MTM - Phase 3 Release 23.0.x 2014-03-20, Recommended for all updates General New option (BN 3076/21 and BN 3076/22) New 40/100G specific two slot rack mount mainframe ONT-602 MTM 4s4x Feature enhancement Added support for new 8.5G capable XFP from vendor Oclaro Release 22.0.x 2013-12-17, Recommended for all updates General Feature enhancement Support of a USB connected CD/DVD-ROM for Linux recovery General - Error logger (ONT-600 only) Feature enhancement Error logger will now show previous errors if errors occurred before the GUI was opened 12 ONT - Release Information 26.0.2 History Release 22.0.x 2013-12-17, Recommended for all updates 100G CFP2 Feature enhancement Flexible multi-byte OTN overhead store to file capture 100G CFP2 Feature enhancement OTN GMP De-mapper CnD Value Measurements 100G CFP2 New option (BN 3061/94.91) 40G Ethernet Drop & Insert from ODU3 direct mapped 100G CFP2 New option (BN 3061/94.66) OTN SDH/SONET Client in ODU1/ODU2 100G CFP2 New option (BN 3061/94.65) OTN SDH/SONET Client in ODU0 100G CFP2 New option (BN 3061/94.63) OTN ODU0 Multiplexing for OTU4 100G CFP2 New option (BN 3061/94.62) OTU4 multi-stage multiplexing applications on CFP2 100G CFP2 New option (BN 3061/94.61) OTU4-ODU2e/2/1 enhanced multiplexing applications on CFP2 100G CFP2 Feature enhancement User controllable alignment marker BIP7 field error insertion and checking 100G CFP2 Feature enhancement CFP4 support for external MDIO 100G CFP2 Feature enhancement MDIO direct register dump capability 100G CFP2 Feature enhancement MDIO 2.2 Support 100G CFP2 Feature enhancement Extended CFP2 transponder compatibility check 100G CFP2 New option (BN 3076/94.34) User entered bit rate (25Gb/s - 28GB/s) 100GE / 40GE New option (BN 3061/94.82) Add multi-stage ODU multiplexing via ODU3 into OTU4 100GE / 40GE Feature enhancement New signal structure OTL4-OTN ODU3 GFP-F L2 L3 Traffic 100GE / 40GE Feature enhancement ODU GMP Mapper Cn Value Measurements 100GE / 40GE Feature enhancement Flexible multi-byte OTN overhead store to file capture ONT - Release Information 26.0.2 13 History Release 22.0.x 2013-12-17, Recommended for all updates 100GE / 40GE New option (BN 3061/92.94) CFP2 adapter 40/100G (CFP1) module (10x10) 100GE / 40GE Feature enhancement User controllable alignment marker BIP7 field error insertion and checking 100GE / 40GE Feature enhancement MDIO 2.2 Support 100GE / 40GE Feature enhancement Extended CFP transponder compatibility check 100GE / 40GE Feature enhancement 11.25G per lane unframed bit rate for 10 x 10G mode Module E Feature enhancement Flexible multi-byte OTN overhead store to file capture Module E Feature enhancement OTN GMP De-mapper CnD Value Measurements Module E Feature enhancement Option to disable LPAC and NFTF alarms Module E Feature enhancement Tunable XFP: entered wavelength/frequency values are rounded to ITU-T grid values now MTM 4s4x Feature enhancement Flexible multi-byte OTN overhead store to file capture MTM 4s4x Feature enhancement OTN GMP De-mapper CnD Value Measurements MTM 4s4x New option (BN 3076/63.23) I.4 EFEC Testing for MTM 10.7/11.x MTM 4s4x New option (BN 3076/63.38) OTN Overhead HDLC Capture for GCC0/1/2/1+2 from an OTU1/2 MTM 4s4x Feature enhancement Option to disable LPAC and NFTF alarms MTM 4s4x Feature enhancement Additional error insertion and evaluation of PCS 8B10B for FC 1/2/4/8G MTM 4s4x Feature enhancement Enable CPRI 1, 2, 3, 4 bit rates with PRBS MTM 4s4x Feature enhancement Tunable XFP: entered wavelength/frequency values are rounded to ITU-T grid values now 14 ONT - Release Information 26.0.2 History Release 21.0.x 2013-09-24, Recommended for all updates Feature enhancement General Look and Feel adaptations in accordance to the JDSU Style-guide 100G CFP2 New module (BN 3076/92.81) 100G/40G CFP2/QSFP+ dual port module 100G CFP2 New option (BN 3061/94.53) 100G Ethernet client in ODU4/OTU4 (CFP2/QSFP+ single and dual port module) 100G CFP2 New option (BN 3061/94.60) 40G Ethernet transcoded client in ODU4/OTU4 (CFP2/QSFP+ single and dual port module) 100G CFP2 New option (BN 3061/94.90) 100G Ethernet drop & insert from ODU4 (CFP2/QSFP+ dual port module) Feature enhancement 100G CFP2 Bit error ratio estimation for unframed signals (CFP2/QSFP+ single port module) 100G CFP2 Feature enhancement Bit slip pattern detection (CFP2/QSFP+ single port module) 100G CFP2 Feature enhancement User selectable MDIO speed (CFP2/QSFP+ single and dual port module) 100G CFP2 New option (BN 3061/94.81) HDLC Capture for GCC0/1/2/1+2 from an OTU3/4 100G CFP2 Feature enhancement Support to access TX/RX (MFAS depending) APS/PCC bytes 100G CFP2 Feature enhancement OTU3 Intrusive Through-Mode 100G CFP2 Feature enhancement OTU4 intrusive Through-mode 100GE / 40GE New option (BN 3061/94.69) OTN Transparent 10G GFP-F mapping 100GE / 40GE Feature enhancement Multistage ODU with GFP as client 100GE / 40GE Feature enhancement Support to access TX/RX (MFAS depending) APS/PCC bytes Module E New option (BN 3061/93.66) 10G MPLS/IP in Sonet/SDH via GFP-F Module E New option (BN 3061/93.67) OTN transparent GFP-F mapping Module E Feature enhancement Support to access TX/RX (MFAS depending) APS/PCC bytes ONT - Release Information 26.0.2 15 History Release 21.0.x 2013-09-24, Recommended for all updates MTM 4s4x New option (BN 3076/63.34) OTN transparent GFP-F mapping MTM 4s4x New option (BN 3076/63.04 or 3076/63.12) Add WAN to MTM MTM 4s4x Feature enhancement Add tunable XFP support to MTM MTM 4s4x Feature enhancement MTM GUI Reporting Enhancements for Production Environment MTM 4s4x Feature enhancement Support to access TX/RX (MFAS depending) APS/PCC bytes MTM 4s4x New option (BN 3076/63.24) I.7 EFEC Testing for MTM 10.7/11.x Release 20.0.x 2013-03-21, Recommended for all updates General - ONT-5xx Feature enhancement ONT-5xx Update Tool extended with module access features General - ONT Scout Feature enhancement ONT Scout polls all the installed options on each module and calibration dates and saves to a CSV file 100G CFP2 New module (BN 3076/92.79) 100G/40G CFP2/QSFP+ module 100G CFP2 New hardware option (BN 3076/92.90) Electrical CFP2 transponder 100G CFP2 New option (BN 3076/94.33) Electrical CFP2 jitter injection 100G CFP2 New option (BN 3076/94.32) CFP2 dynamic skew variation 100G CFP2 New option (BN 3076/94.30) CFP2/QSFP+ Hardware Validation 100G CFP2 New option (BN 3076/94.31) CFP2 advanced error analysis 100G CFP2 Feature enhancement 100G Ethernet/IP QoS application 100G CFP2 Feature enhancement 40G Ethernet/IP QoS application 100G CFP2 Feature enhancement 100G MLD BERT application 16 ONT - Release Information 26.0.2 History Release 20.0.x 2013-03-21, Recommended for all updates 100G CFP2 Feature enhancement 40G MLD BERT application 100G CFP2 Feature enhancement OTU4 bulk application 100G CFP2 Feature enhancement OTU3 bulk application 100G CFP2 Feature enhancement OTL4.4 BERT application 100G CFP2 Feature enhancement OTL3.4 BERT application 100G CFP2 Feature enhancement External MDIO control capability 100GE / 40GE New option (BN 3061/94.78) OTN GFP-F up to 100G 100GE / 40GE Feature enhancement New signal structure OTL4-OTN ODUflex GFP-F L2 L3 Traffic 100GE / 40GE Feature enhancement Delay measurements according to G.709 (overhead based) Module E Feature enhancement SDH/SONET lower order mapping support Module E New option (BN 3061/93.64) HDLC Capture for GCC0/1/2/1+2 from an OTU1/2 Module E Option BN 3061/93.63 Maximum number of ESMC delay measurement results increased MTM 4s4x New option (BN 3076/63.35) OTN ODU Multichannel (OTU2 rates) MTM 4s4x Feature enhancement SDH/SONET lower order mapping support MTM 4s4x Feature enhancement Delay measurements according to G.709 (overhead based) MTM 4s4x New option (BN 3076/63.27) GFP-F Release 19.0.x 2012-12-12, Recommended for all updates General - ONT Scout Feature enhancement Usability improvements ONT - Release Information 26.0.2 17 History Release 19.0.x 2012-12-12, Recommended for all updates General - ONT 601 Feature enhancement ONT-601 supports time synchronization via NTP 100GE / 40GE New option (BN 3061/94.77) OTN GFP-F up to 10G 100GE / 40GE Feature enhancement OTN intrusive through-mode 100GE / 40GE New option (BN 3061/94.80) 40 Gbit/s Ethernet transcoded client mapping in ODU3 -> ODU4 100GE / 40GE Feature enhancement OTN Error/alarm burst insertion with duration 100GE / 40GE Feature enhancement OTN ODUflex predefined Cm values 100GE / 40GE Feature enhancement OTN JC byte error insertion enhancement 100GE / 40GE Feature enhancement Updated payload type interpretation 100GE / 40GE Feature enhancement SDH/SONET user option to disable PJE alarm evaluation 100GE / 40GE Feature enhancement Increased separation time for Ethernet service disruption measurement 40 / 45G Feature enhancement OTN Error/alarm burst insertion with duration 40 / 45G Feature enhancement OTN ODUflex predefined Cm values 40 / 45G Feature enhancement OTN JC byte error insertion enhancement 40 / 45G Feature enhancement OTN ODU-Multi-Channel stuffing table-view 40 / 45G Feature enhancement Updated payload type interpretation 40 / 45G Feature enhancement SDH/SONET user option to disable PJE alarm evaluation Module E Feature enhancement Delay measurements according to G.709 (overhead based) Module E Feature enhancement New function stack OTU2-ODU1-GFP-F/MAC-IP 18 ONT - Release Information 26.0.2 History Release 19.0.x 2012-12-12, Recommended for all updates Module E Feature enhancement OTN Error/alarm burst insertion with duration Module E Feature enhancement OTN ODUflex predefined Cm values Module E Feature enhancement OTN JC byte error insertion enhancement Module E Feature enhancement OTN ODU-Multi-Channel stuffing table-view Module E Feature enhancement Updated payload type interpretation Module E Feature enhancement SDH/SONET user option to disable PJE alarm evaluation Module E - Jitter / Wander Feature enhancement Reset of phase for wander modulation MTM 4s4x New option (BN 3076/63.86) 8/10G FC - Quad Port MTM 4s4x New option (BN 3076/63.87) 1/2/4G FC - Quad Port MTM 4s4x New option (BN 3076/63.81) 1 GigE - Quad Port MTM 4s4x New option (BN 3076/63.25) Enable OTU1f,OTU2f (11.27G,11.31G) overclocked OTN rates MTM 4s4x New option (BN 3076/63.84) Quad Port SDH/SONET loading mode for 10G SDH/SONET rates MTM 4s4x New option (BN 3076/63.85) Quad Port SDH/SONET loading mode for lower-rates SDH/SONET MTM 4s4x Feature enhancement OTN Error/alarm burst insertion with duration MTM 4s4x Feature enhancement OTN ODUflex predefined Cm values MTM 4s4x Feature enhancement OTN Forward Error Correction Advanced Insertion MTM 4s4x Feature enhancement OTN TX FAS bytes manipulation added MTM 4s4x Feature enhancement OTN JC byte error insertion enhancement ONT - Release Information 26.0.2 19 History Release 19.0.x 2012-12-12, Recommended for all updates MTM 4s4x Feature enhancement Updated payload type interpretation MTM 4s4x Feature enhancement SDH/SONET user option to disable PJE alarm evaluation Release 18.0.x 2012-09-26, Recommended for all updates General Feature enhancement Splash screen showing available (but not yet enabled) software options 100GE / 40GE New option (BN 3061/94.68) 10G Ethernet/IP in ODU2e client for OTU3/OTU3e1/OTU3e2 and OTU4 100GE / 40GE New option (BN 3061/94.70) 1G Ethernet/IP GFP-T mapped ODU0 client for OTU3/OTU3e2 and OTU4 100GE / 40GE New option (BN 3061/94.67) 40G Ethernet GFP-F mapped into OTU3-ODU3/flex 100GE / 40GE New option (BN 3061/94.73) OTN ODU Multichannel (OTU4 rate) 100GE / 40GE Feature enhancement ODU3 client in an OTU4 100GE / 40GE New option (BN 3061/94.79) OTN 40G SDH/SONET client into ODU3 into OTU4 rates 100GE / 40GE Feature enhancement Ethernet MAC supports Ethertypes below 600 (hex) Module E Feature enhancement New function stack SDH(SONET)/GFP-F/MAC-IP Module E Feature enhancement 4G Fibre Channel unframed Module E - Jitter / Wander Feature enhancement Settable averaging time for 1pps measurement Module E - Jitter / Wander Feature enhancement 1pps Phase delay align Module E - Jitter / Wander Feature enhancement Settable trigger threshold for BITS RX Module E - Jitter / Wander Feature enhancement Jitter/Wander documentation shifted into separate documents MTM 4s4x New option (BN 3076/63.82) Quad Port OTN loading mode for 10G OTU rates 20 ONT - Release Information 26.0.2 History Release 18.0.x 2012-09-26, Recommended for all updates MTM 4s4x New option (BN 3076/63.83) Quad Port OTN loading mode for 2.7G OTU1 rate MTM 4s4x New option (BN 3076/63.80) 4 Port Ethernet/IP (10G LAN-Phy) MTM 4s4x - ONT-601 Feature enhancement Displayed text enhancements Release 17.1.x 2012-07-31, Recommended for MTM 4s4x only MTM 4s4x New option (BN 3076/63.52) 8/10G Fibre Channel - Dual Port MTM 4s4x New option (BN 3076/63.53) 8/10G Fibre Channel - Single Port MTM 4s4x New option (BN 3076/63.72) 1/2/4G Fibre Channel - Dual Port MTM 4s4x New option (BN 3076/63.73) 1/2/4G Fibre Channel - Single Port Release 17.0.x 2012-06-21, Recommended for all updates General New options (BN 3076/07 and 3076/08) ONT-612 mainframes 100GE / 40GE New option (BN 3061/94.73) ONT ODU Multichannel (OTU3 rates) 100GE / 40GE New option (BN 3061/94.76) SDH256/OC-768 client into ODU3 100GE / 40GE Feature enhancement Support MDIO 2.0 for CFP control (0xA000 page compliance) Module E Feature enhancement Separate reporting on errored 1s and 0s on unframed applications Module E - Jitter / Wander New option (BN 3061/93.90) BITS Jitter Module E - Jitter / Wander Feature enhancement Improved precision and resolution for Wander 1pps and 1pps delay measurements for 2.5G Jitter-D and 10G Jitter-E MTM 4s4x New option (BN 3076/60.11) MTM plug-in into ONT-603/606/612 ONT - Release Information 26.0.2 21 History Release 17.0.x 2012-06-21, Recommended for all updates MTM 4s4x Feature enhancement OTN intrusive through-mode MTM 4s4x Feature enhancement SDH/SONET intrusive through-mode MTM 4s4x Feature enhancement Separate reporting on errored 1s and 0s on unframed applications Release 16.0.x 2012-03-23, Recommended for all updates General - ONT-5xx Feature enhancement New Java application added to allow a centralized software update of multiple ONT-5xx mainframes from a normal desktop PC. General - ONT-5xx Feature enhancement Improved robustness in case of network problems 100GE / 40GE New option (BN 3061/94.71) MAC/IP packet capture for the client service board 100GE / 40GE New hardware (BN 3076/92.70) CFP Module for production test 100GE / 40GE New hardware (BN 3076/92.60) Client Service Board for ONT-600 chassis 100GE / 40GE Feature enhancement STM-256 / STS-768 over STL Module E Feature enhancement OTN-ODU Multichannel Enhancements Module E - Jitter / Wander New option (BN 3061/90.63) Jitter support for Fiber Channel 10G Module E - Jitter / Wander Feature enhancement Support of G.812 and GR1244 TDEV result masks Module E - Jitter / Wander Feature enhancement All rates Jitter with one Module E for ONT-5xx platform Module E - Jitter / Wander Feature enhancement Jitter 10G-E module available for ONT-600 platform Module E - Jitter / Wander Feature enhancement Jitter 2.5G-D module available for ONT-600 platform Module E - Jitter / Wander Feature enhancement All rates Jitter with one Module E for ONT-600 platform 22 ONT - Release Information 26.0.2 History Release 16.0.x 2012-03-23, Recommended for all updates MTM 4s4x New option (BN 3076/63.28) OTN ODU standard multiplexing (2.5G time-slots) of ODU1 into OTU2 MTM 4s4x New option (BN 3076/63.32) ODUflex multiplexing into OTU2 MTM 4s4x New option (BN 3076/63.44) OTN STM-1/4 or STS-3/12 client into ODU0 container MTM 4s4x New option (BN 3076/63.30) Dual-stage ODU0-ODU1-OTU2 multiplexing MTM 4s4x Feature enhancement MTM single-port only support Module E (low-rate capable) - Jitter / Wander Feature enhancement Added Wander TDEV evaluation masks G.812 Output wander for Types II and III node clocks Module E (low-rate capable) - Jitter / Wander Feature enhancement Added Wander Transfer mask GR1244 Stratum 2 & 3E, Stratum 3 and Stratum 4E & 4 Release 15.0.x 2011-12-16, Recommended for all updates General Feature enhancement ONT-600 Mainframes General Feature enhancement ONT-603D, ONT-606D General Feature enhancement ONT-603H, ONT-606H General Feature enhancement ONT-603B, ONT-606B 100GE / 40GE Feature enhancement Signal degrade and signal failed monitoring 100GE / 40GE Feature enhancement 40G Ethernet Client Transcoder enhancements 40 / 45G Feature enhancement Signal degrade and signal failed monitoring. Module E (low-rate capable) Feature enhancement Signal degrade and signal failed monitoring Module E (low-rate capable) - Jitter / Wander Feature enhancement Jitter/Wander 2.5G-D (155/622M,1.25/2.5/2.7G) Module E (low-rate capable) - Jitter / Wander Feature enhancement Jitter/Wander 1G SyncE (1.25G) ONT - Release Information 26.0.2 23 History Release 15.0.x 2011-12-16, Recommended for all updates Module E (low-rate capable) - Jitter / Wander Feature enhancement New MTIE transients generator masks MTM 4s4x Feature enhancement Enable the MTM SFP Ports with selected bit rates MTM 4s4x New option (BN 3076/63.60) 1G Ethernet dual-port support as physical Signal MTM 4s4x New option (3076/63.61) Enable dual-port lower rate SDH/SONET signals MTM 4s4x New option (3076/63.62) Enables the dual-port OTU1 Frame MTM 4s4x New option (3076/63.31) ODU0 single stage multiplexed in OTU2 and OTU1 MTM 4s4x New option (3076/63.29) Enhanced Multiplexing for MTM MTM 4s4x New option (3076/63.26) 1G Ethernet support as ODU0/GFP-T Client Signal Release 14.0.x 2011-10-17, Recommended for all updates 100GE / 40GE Feature enhancement Reset & Initialize CFP 100GE / 40GE Feature enhancement TX Frequency Variation 100GE / 40GE Feature enhancement Stress Test Module E New option (BN 3061/93.61) OTN ODU Multichannel (OTU2 rates) Release 13.0.x 2011-07-27, Recommended for all updates 100GE / 40GE New module (BN 3061/92.60) 100G Module CFP with Extension Module 100GE / 40GE Feature enhancement Dual port 100G / 40G solution - wrapper / de-wrapper 100GE / 40GE New option (BN 3061/94.72) STL-256 bulk 24 ONT - Release Information 26.0.2 History Release 13.0.x 2011-07-27, Recommended for all updates 100GE / 40GE - MAC Layer Feature enhancement Ethernet / IP packet capture 100GE / 40GE - PHYS Layer Feature enhancement Stress test user selectable pattern mode Release 12.0.x 2011-04-27, Recommended for all updates 100GE / 40GE New option (BN 3061/92.96) QSFP+ Adapter 100GE / 40GE Feature enhancement New unframed 100G bit rates 100GE / 40GE Feature enhancement User selectable CAUI/XLAUI lane for RX frequency offset measurement 100GE / 40GE Feature enhancement User offset list in physical layer stress test 100GE / 40GE Feature enhancement Physical layer stress test supports layer stacks with OTN / Ethernet 100GE / 40GE Feature enhancement Multiple Ethernet / IP traffic profiles 100GE / 40GE Feature enhancement Ethernet traffic profile enhancements 100GE / 40GE Feature enhancement Automated Ethernet preamble transparency test 100GE / 40GE Feature enhancement Automated throughput test 100GE / 40GE Feature enhancement Support for 5 MPLS labels 100GE / 40GE Feature enhancement User defined MAC SFD 100GE / 40GE Feature enhancement User defined MAC preamble 100GE / 40GE Feature enhancement User defined MAC/IP payload 100GE / 40GE Feature enhancement MAC/IP framed BERT Intermediate results 100GE / 40GE Feature enhancement QOS measurement: Option to disable NFTF alarm ONT - Release Information 26.0.2 25 History Release 12.0.x 2011-04-27, Recommended for all updates Feature enhancement 100GE / 40GE Invalid SFD Error Generation Feature enhancement 100GE / 40GE MAC/IP: Optimized flow editor GUI for single flow mode Feature enhancement 100GE / 40GE MAC/IP: Coupled flow mode 100GE / 40GE New option (BN 3061/94.66) OTN SDH/SONET client into ODU2/1 container Feature enhancement 100GE / 40GE OTN enhanced multiplexing for OTU4 Feature enhancement 100GE / 40GE OTN multi-stage multiplexing for OTU4 Feature enhancement 100GE / 40GE OTN Performance analysis measurements Feature enhancement 100GE / 40GE OTN Multiplexing: free port number assignment to ODUs in tributary slots added Feature enhancement 100GE / 40GE OTN bulk transfer delay measurement added Feature enhancement 100GE / 40GE OTN ODU1 bulk clients can be GMP mapped now Feature enhancement 100GE / 40GE OTN allows TCM-BIP generation to be switched OFF now Feature enhancement 100GE / 40GE OTN TX stuffing range of AMP mapped clients enhanced Feature enhancement 100GE / 40GE OMFI alarm/error insertion and measurements for OTU4 Feature enhancement 40 / 43G - Jitter / Wander New compact Wander TIE data format (*.chrd) Feature enhancement 40 / 45G OTN Performance analysis measurements Feature enhancement 40 / 45G OTN Multiplexing: free port number assignment to ODUs in tributary slots added 40 / 45G Feature enhancement OTN ODU1 bulk clients can be GMP mapped now 40 / 45G Feature enhancement OTN allows TCM-BIP generation to be switched OFF now 26 ONT - Release Information 26.0.2 History Release 12.0.x 2011-04-27, Recommended for all updates Feature enhancement 40 / 45G OTN TX stuffing range of AMP mapped clients enhanced Module E New option (BN 3061/93.63) SyncE ESMC G.8264 (1GE, 10GE) Feature enhancement Module E Support of Tunable DWDM XFP Lasers Feature enhancement Module E OTN Performance analysis measurements Feature enhancement Module E OTN Multiplexing: free port number assignment to ODUs in tributary slots added Module E Feature enhancement OTN ODU1 bulk clients can be GMP mapped now Module E Feature enhancement OTN allows TCM-BIP generation to be switched OFF now Module E Feature enhancement OTN TX stuffing range of AMP mapped clients enhanced Module E Feature enhancement SDH/SONET intrusive through mode Module E - Jitter / Wander Feature enhancement New compact Wander TIE data format (*.chrd) Release 11.0.x 2010-12-14, Recommended for all updates General Feature enhancement Measurement restart button of layered applications moved to new location Remote Control - Driver Feature enhancement Driver libraries adapted to current releases 100GE / 40GE New option (BN 3061/94.53) OTN 111.8G with 100GE Client 100GE / 40GE New option (BN 3061/94.60) OTN 43G with transcoded Client 100GE / 40GE Feature enhancement User settable xAUI/OTL output level, pre-emphasis and slew rate 100GE / 40GE Feature enhancement Lambda groups assignment with "include bit error" option 100GE / 40GE Feature enhancement Automated Physical Layer stress test ONT - Release Information 26.0.2 27 History Release 11.0.x 2010-12-14, Recommended for all updates 100GE / 40GE Feature enhancement New Ethernet PCS layer TX error "User lane ID" 100GE / 40GE Feature enhancement Physical Layer GUI Enhancements 100GE / 40GE New option (BN 3061/94.61) OTN enhanced multiplexing 100GE / 40GE New option (BN 3061/94.62) OTN multi-stage multiplexing 100GE / 40GE New option (BN 3061/94.63) OTN generation/analysis of ODU0 container 100GE / 40GE New option (BN 3061/94.64) ONT generation/analysis of ODUFlex container 100GE / 40GE New option (BN 3061/94.65) OTN STM4/1 or STS-12/3 client into ODU0 container 100GE / 40GE Feature enhancement OTN Transfer delay measurements added for GMP mapped clients 100GE / 40GE Feature enhancement OTN Client Signal Fail (CSF) alarm added 100GE / 40GE Feature enhancement Quick start guide added to documentation 40 / 43G Feature enhancement OTN Client Signal Fail (CSF) alarm added 40 / 45G New option (BN 3061/93.15) OTN enhanced multiplexing 40 / 45G New option (BN 3061/93.16) OTN multi-stage multiplexing 40 / 45G New option (BN 3061/93.17) OTN generation/analysis of ODU0 container 40 / 45G New option (BN 3061/93.18) ONT generation/analysis of ODUFlex container 40 / 45G New option (BN 3061/93.23) OTN STM4/1 or STS-12/3 client into ODU0 container 40 / 45G Feature enhancement OTN Transfer delay measurements added for GMP mapped clients 40 / 45G Feature enhancement OTN Client Signal Fail (CSF) alarm added 28 ONT - Release Information 26.0.2 History Release 11.0.x 2010-12-14, Recommended for all updates 40 / 45G Feature enhancement OTN bulk mapping/de-mapping into OTU3e2 40 / 45G Feature enhancement OTN mapping/de-mapping of ODUe2 bulk container into OTU3 40 / 45G Feature enhancement OTN mapping of ODUe2 bulk container into OTU3e2 Module E New option (BN 3061/93.33) OTN STM4/1 or STS-12/3 client into ODU0 container Module E Feature enhancement Wrapper/De-wrapper for multi-stage ODU0 with 1GigE client Module E Feature enhancement OTN Transfer delay measurements added for GMP mapped clients Module E Feature enhancement OTN Client Signal Fail (CSF) alarm added Module E - Jitter / Wander New module (BN 3061/90.75) New Jitter 10G-E module Module E - Jitter / Wander New module (BN 3061/90.76) New Jitter 10G-E module - dual wavelength Module E - Jitter / Wander New option (BN 3061/90.77) Differential electrical interface Module E - Jitter / Wander New option (BN 3061/90.79) OTU2 overclocked bit rates (11.049G and 11.095G) Module E - Jitter / Wander New option (BN 3061/90.81) OTL3.4 bit rate (10.755G) Module E - Jitter / Wander New option (BN 3061/90.99) OTL4.10 bit rate (11.181G) Module E - Jitter / Wander Feature enhancement Parallel filters Module E - Jitter / Wander Feature enhancement Generation of MTIE phase transients Module E (low-rate capable) - Jitter / Wander Feature enhancement Combination with the new BERT module Release 10.1.x 2010-10-27, Recommended for all updates General - OTN / ODU Layer Feature enhancement TCM enhancements in OTN / ODU layers ONT - Release Information 26.0.2 29 History Release 10.1.x 2010-10-27, Recommended for all updates Feature enhancement Module E GFP mapped 1GE client support into multi-stage OTN multiplexing (optional) Feature enhancement Module E Wrapper/De-wrapper applications for 1GE line-rate and ODU0 clients (optional) Module E - Jitter / Wander New option (BN 3061/90.87) Support of 10.755G Jitter/Wander generation and analysis Module E (low-rate capable) - Jitter / Wander Feature enhancement The low-rate capable Module E now works together with Jitter-D Release 10.0.x 2010-09-16, Recommended for certain customers only General - All layered applications Feature enhancement Enhanced usability for layered applications (tabs on left-hand side; tabs include alarm LEDs) General - All layered applications Feature enhancement Enhanced visibility of current and history alarm/error information General - All layered applications Feature enhancement Short cut to over-all layer summary status General - All layered applications Feature enhancement Restart measurement button General - All layered applications Feature enhancement Graphical event list shows only currently evaluated alarms/errors now General - Mainframes Feature enhancement Clock-Module reference clocks (64kHz, 64kHz composite clock, 6.3MHz) General - Mainframes Feature enhancement Manual pages of the web-site of the ONT-5xx test set improved 100GE / 40GE New option (BN 3061/94.55) OTN 112G bulk (incl. OTL4.10) 100GE / 40GE New option (BN 3061/94.57) OTN 43G bulk (incl. OTL3.4) 100GE / 40GE New option (BN 3061/94.58) OTN 44.57G line-rate 100GE / 40GE New option (BN 3061/94.59) OTN 44.58G line-rate 100GE / 40GE Feature enhancement MDIO control of CFP transponder enabled 100GE / 40GE Feature enhancement MDIO dump functionality 30 ONT - Release Information 26.0.2 History Release 10.0.x 2010-09-16, Recommended for certain customers only 100GE / 40GE Feature enhancement CFP optical power measurement 100GE / 40GE Feature enhancement Per optical lane LOS measurement and generation 100GE / 40GE Feature enhancement PRBS15 and inverted PRBS15 test pattern 100GE / 40GE Feature enhancement Improved Ethernet/IP QoS evaluation 100GE / 40GE Feature enhancement Improved Ethernet/IP service disruption measurement 100GE / 40GE Feature enhancement PCS/MLD, OTL and MAC/IP GUI Enhancements 40 / 45G New option (BN 3061/93.16) OTN multi-stage multiplexing of ODU1 into ODU2 into OTU3 Module E New module (BN 3061/92.05) Low-rate capable Module E Module E New module (BN 3061/92.09) Low-rate capable Module E with internal optics Module E New option (BN 3061/93.34) Lower rates SDH / SONET (STM1,4,16; OC3,12,48) Module E New option (BN 3061/93.43) 1G Ethernet Module E New option (BN 3061/93.57) Lower rates OTU1 (2.7Gb/s) Module E New option (BN 3061/93.58) OTN generation/analysis of ODU0 container Module E New option (BN 3061/93.59) ONT generation/analysis of ODUFlex container Module E New option (BN 3061/93.55) OTN enhanced multiplexing with payload type 21 Module E New option (BN 3061/93.56) OTN multi-stage multiplexing of ODU0 into ODU1 into OTU2 Module E New option (BN 3061/93.44) GFP-T Module E Feature enhancement OTN GFP-F mapped MAC/IP into ODUFlex (optional) ONT - Release Information 26.0.2 31 History Release 10.0.x 2010-09-16, Recommended for certain customers only Feature enhancement Module E New unframed rate 10.755 Gb/s (OTL3.4) Feature enhancement Module E - Jitter / Wander Additional MTJ/MTW sensors for SyncE Jitter/Wander Feature enhancement Module E - Jitter / Wander Switch Laser On before starting JTF calibration or measurement Feature enhancement Module E - Jitter / Wander Improved feedback during Automated Measurement Sequences (AMS) Release 9.1.x 2010-03-17, Recommended for all updates General New option (BN 3061/93.98) External wander analysis software on PC Feature enhancement 100GE / 40GE Fast Auxiliary output supports CFP monitor clock output Feature enhancement 100GE / 40GE PRBS7 and inverted PRBS7 test pattern for unframed BERT and PCS layer BERT 100GE / 40GE Feature enhancement Interim results in unframed BERT 100GE / 40GE Feature enhancement Unframed BERT table view results support count and ratio mode 100GE / 40GE Feature enhancement CFP power and current measurement with maximum hold function 100GE / 40GE Feature enhancement Lambda groups in PCS layer 100GE / 40GE Feature enhancement Virtual lane swap alarm in PCS layer indicates occurrence of virtual lane swapping events 100GE / 40GE Feature enhancement Live traffic evaluation mode in unframed BERT, PCS- and MAC/IP-layer 100GE / 40GE Feature enhancement RFC 2544 support for MAC, VPLS, PBB/PBT, IPv4 and IPv6 100GE / 40GE Feature enhancement Scaled mode for MAC/IP traffic generation 40 / 45G New module (BN 3061/91.86) 40G SDH/SONET NRZ V2B 40 / 45G New option (BN 3061/93.20) Overclocked OTU3e1 (44.57G) 32 ONT - Release Information 26.0.2 History Release 9.1.x 2010-03-17, Recommended for all updates 40 / 45G New module (BN 3061/91.85) 43G OTN with bulk client DPSK V2 40 / 45G Feature enhancement DPSK transponder interoperability mode (e.g. Opnext with Mintera) Module E - Jitter / Wander Feature enhancement 10.3G (SyncE) wander enhancements Module E - Jitter / Wander New option (BN 3061/93.97) Frequency offset (fine) in ppb for line rates and sync signals Module E - Jitter / Wander New option (BN 3061/90.74) Signal interruptions for sync signals Module E - Jitter / Wander Feature enhancement Continuous measurement of frequency offset (in ppb) and frequency drift rate Module E - Jitter / Wander New option (BN 3061/90.74) Wander measurements on clock signals Module E - Jitter / Wander New option (BN 3061/90.74) Support of pps (pulse-per-second) Module E - Jitter / Wander New option (BN 3061/90.74) New wander reference clocks Release 9.0.x 2009-12-16, Recommended for all updates General - Report creation Feature enhancement A company logo can be integrated as part of the report header General - Report creation Feature enhancement The name of the report file appears as part of the report header General Feature enhancement Configuration information as CSV file General - OTN / ODU Layer Feature enhancement Access to FTFL operator specific field added to user interface 100GE / 40GE New module (BN 3061/92.50) 100G base unit with 103.12G (unframed, Ethernet), 111.81G (unframed) 100GE / 40GE New option (BN 3061/94.51) Additional rates 39.81G (unframed), 41.25G (unframed, Ethernet), 43.018G (unframed), 44.5G (unframed) 100GE / 40GE New option (BN 3061/92.52) Physical layer validation application 100GE / 40GE New option (BN 3061/94.56) Skew variation generation application ONT - Release Information 26.0.2 33 History Release 9.0.x 2009-12-16, Recommended for all updates 100GE / 40GE New option (BN 3061/94.54) IP/multi stream application 100GE / 40GE New module (BN 3061/92.98) Electrical access CFP with CAUI access 40 / 43G - Jitter / Wander New module Jitter-B hardware with enhanced optical sensitivity 40 / 43G - Jitter / Wander Feature enhancement RX eye clock output (recovered clock) 40 / 45G New module (BN 3061/91.81) V2 hardware NRZ 40 / 45G New option (BN 3061/93.29) Through mode on V2 hardware Module E New option (BN 3061/93.39) 10GigE via GFP in VCAT mapped into STM-64/OC-192 Module E New option (BN 3061/93.39) 10GigE via GFP in VCAT mapped into OTU2 - STM-64/OC-192 Module E New option (BN 3061/93.39) 10GigE via GFP in VCAT mapped into OTU2 - ODU1 - STM-16/OC-48 Module E - Jitter / Wander New option (BN 3061/93.95) Wander generation and analysis Module E - Jitter / Wander New option (BN 3061/93.97) Wander expert Module E - Jitter / Wander Feature enhancement Improved MTJ sensors Module E - Jitter / Wander Feature enhancement SCPI remote control 40 / 45G New module V2 hardware pre-release Release 8.0.x 2009-05-06, Recommended for all updates General - Layered applications Feature enhancement Interactive abbreviation help General - Layered applications Feature enhancement Enhanced edit of the signal structure 40 / 43G Feature enhancement GCC capture for OTU3 (part of OTN option) 34 ONT - Release Information 26.0.2 History Release 8.0.x 2009-05-06, Recommended for all updates 40 / 43G New option (BN 3061/91.55) OTU3 43G NRZ-DPSK (V1 hardware) 40 / 43G - SDH / SONET Layer Feature enhancement Delay compensation for different mapping types optimized 40 / 43G - Electrical only interface Feature enhancement Access to threshold and phase optimization GUI page added. 40 / 43G - Jitter / Wander Feature enhancement Check for sufficient hard disk space added Module E New option (BN 3061/93.45) GFP-F into OTU2 Module E Feature enhancement 10G WAN Module E Feature enhancement Multi-Channel High Order with Service Disruption (part of MC option) Module E Feature enhancement Multi-Channel High Order as an ODU1 client Module E Feature enhancement GCC capture for OTU2 (part of OTN option) ONT - Release Information 26.0.2 35 ONT Optical Network Tester Release Information Release 26.0.2 February 2015 The information in this publication is subject to change without notice. JDS UNIPHASE CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. This publication contains information protected by copyright. No part of this publication may be photocopied or reproduced in any form without prior written consent from JDSU Deutschland GmbH. © Copyright 2015 JDSU Deutschland GmbH. All rights reserved. All specifications are subject to change without notice. NORTH AMERICA TOLL FREE: 1 866 228 3762 FAX: +1 301 353 9216 LATIN AMERICA TEL: +55 11 5503 3800 FAX: +55 11 5505 1598 ASIA PACIFIC TEL: +852 2892 0990 FAX: +852 2892 0770 EMEA TEL: +49 7121 86 2222 FAX: +49 7121 86 1222 WEBSITE: www.jdsu.com