Download KT-9 Kappameter

Transcript
5
5
Simple beeps confirm operations when configuring the KT-9 for
the various modes of operation.
Simple beeps confirm operations when configuring the KT-9 for
the various modes of operation.
In the scan mode, a continuous audio tone that is directly proportional to the measured susceptibility is heard. This facilitates
heads-up operation.
In the scan mode, a continuous audio tone that is directly proportional to the measured susceptibility is heard. This facilitates
heads-up operation.
Economical operation – By utilizing the latest technology
CMOS VLSI circuitry, very low power consumption takes place in
the KT-9. Consequently, a single 9-volt battery is usually sufficient for a full season (up to 10,000 readings under normal conditions).
Economical operation – By utilizing the latest technology
CMOS VLSI circuitry, very low power consumption takes place in
the KT-9. Consequently, a single 9-volt battery is usually sufficient for a full season (up to 10,000 readings under normal conditions).
Storage and transportation – A robust leather case is supplied with the KT-9. The case can be either carried over the
shoulder on a strap or worn on a belt to facilitate transportation in the field. The case has a moulded bottom to accommodate the sensor head with the pin in order to prevent the KT-9
from sliding around. Consequently, the unit should be stored
sensor down in the case when not in use.
Storage and transportation – A robust leather case is supplied with the KT-9. The case can be either carried over the
shoulder on a strap or worn on a belt to facilitate transportation in the field. The case has a moulded bottom to accommodate the sensor head with the pin in order to prevent the KT-9
from sliding around. Consequently, the unit should be stored
sensor down in the case when not in use.
There is also a small compartment under the lid of the carrying
case for storing a spare battery and some accessories, such as a
spare rubber PIN cover, a PIN assembly or a replacement stud.
There is also a small compartment under the lid of the carrying
case for storing a spare battery and some accessories, such as a
spare rubber PIN cover, a PIN assembly or a replacement stud.
Even though the KT-9 has been designed to be a rugged
instrument, it still can be damaged by severe impacts. Also,
please note that the KT-9 is only moisture proof, not water
proof. Consequently, total immersion in water (i.e. falling
into a river, etc.) or long exposure in heavy rains is not advisable for either the instrument or the operator.
Even though the KT-9 has been designed to be a rugged
instrument, it still can be damaged by severe impacts. Also,
please note that the KT-9 is only moisture proof, not water
proof. Consequently, total immersion in water (i.e. falling
into a river, etc.) or long exposure in heavy rains is not advisable for either the instrument or the operator.