Download KT-9 Kappameter
Transcript
5 5 Simple beeps confirm operations when configuring the KT-9 for the various modes of operation. Simple beeps confirm operations when configuring the KT-9 for the various modes of operation. In the scan mode, a continuous audio tone that is directly proportional to the measured susceptibility is heard. This facilitates heads-up operation. In the scan mode, a continuous audio tone that is directly proportional to the measured susceptibility is heard. This facilitates heads-up operation. Economical operation – By utilizing the latest technology CMOS VLSI circuitry, very low power consumption takes place in the KT-9. Consequently, a single 9-volt battery is usually sufficient for a full season (up to 10,000 readings under normal conditions). Economical operation – By utilizing the latest technology CMOS VLSI circuitry, very low power consumption takes place in the KT-9. Consequently, a single 9-volt battery is usually sufficient for a full season (up to 10,000 readings under normal conditions). Storage and transportation – A robust leather case is supplied with the KT-9. The case can be either carried over the shoulder on a strap or worn on a belt to facilitate transportation in the field. The case has a moulded bottom to accommodate the sensor head with the pin in order to prevent the KT-9 from sliding around. Consequently, the unit should be stored sensor down in the case when not in use. Storage and transportation – A robust leather case is supplied with the KT-9. The case can be either carried over the shoulder on a strap or worn on a belt to facilitate transportation in the field. The case has a moulded bottom to accommodate the sensor head with the pin in order to prevent the KT-9 from sliding around. Consequently, the unit should be stored sensor down in the case when not in use. There is also a small compartment under the lid of the carrying case for storing a spare battery and some accessories, such as a spare rubber PIN cover, a PIN assembly or a replacement stud. There is also a small compartment under the lid of the carrying case for storing a spare battery and some accessories, such as a spare rubber PIN cover, a PIN assembly or a replacement stud. Even though the KT-9 has been designed to be a rugged instrument, it still can be damaged by severe impacts. Also, please note that the KT-9 is only moisture proof, not water proof. Consequently, total immersion in water (i.e. falling into a river, etc.) or long exposure in heavy rains is not advisable for either the instrument or the operator. Even though the KT-9 has been designed to be a rugged instrument, it still can be damaged by severe impacts. Also, please note that the KT-9 is only moisture proof, not water proof. Consequently, total immersion in water (i.e. falling into a river, etc.) or long exposure in heavy rains is not advisable for either the instrument or the operator.