Download "user manual"

Transcript
IM2830AJ.DOC
IM2830A
Directory: 962830A
Shadin Avionics
INSTALLATION MANUAL
FUEL/AIR DATA COMPUTER
P/N 962830A-1(A), 962830A-2(A), 962830A-3(A)
Rev: J
Page: 9-20
Stage 3 Loop-back configuration:
Switch 1 is set to 3 to indicate that the stage 3 loop-back is being performed.
SWITCH 2, K-FACTOR TABLE SELECTION:
For F/ADC 962830-1(A) and 962830-2(A) only.
0
1
2-F
-
Standard K-FACTOR Matrix 0 - (Table 2 in this manual)
Alternate K-FACTOR Matrix 1- (Table 3 in this manual)
(DO NOT USE)
SWITCH 3, FUEL FLOW DELAY TIME
0
- No Delay
1
- 5 Second Delay
2
- 10 Second Delay
3
- 15 Second Delay
4
- 20 Second Delay
5
- 25 Second Delay
6
- 30 Second Delay
7
- 35 Second Delay
8
- 40 Second Delay
9
- 45 Second Delay
A-F - (DO NOT USE)
SWITCH 4
0
1
2-F
SPECIAL OPTION DESCRIPTION
-ARINC 429 labels 206 (IAS) and 210 (TAS) are not
transmitted if the IAS < 20 knots
-ARINC 429 labels 206 (IAS) and 210 (TAS) are transmitted
as zero knots if the IAS < 20 knots
Reserved – DO NOT USE
F/ADC Software Version
93.00.67 and up
93.00.67 and up