Download key

Reference [Projects]
• REMAIN (h/m units)
The screen for selecting the copy destination project appears
The approximate recordable time remaining for each track is
on the display.
shown in hours (h)/minutes (m)/seconds.
PRJ COPY
COPY TO
REMAIN
45h55m46
• PRJ SIZ (MB units)
This shows the size of the currently loaded project in MB
14
Copy destination project number
3.
Turn the dial to select the copy destination project
number, and press the [ENTER] key.
(megabyte) units.
The indication “SURE?” appears on the display.
PRJ SIZE
00122MB
4.
Press the [ENTER] key to copy the project, or press
the [EXIT] key to cancel.
When copying is completed, the unit returns to the main
• PRJ SIZ (h/m units)
This shows the size of the currently loaded project in terms
screen.
of the recorded time per track, in hours (h)/minutes (m)/
seconds.
Erasing a project
PRJ SIZE
00h24m13
This operation erases the specified project from the hard
disk.
1.
H INT
• These screens are for display only, and contain no items
that can be edited.
• The remaining recordable time is an approximation.
Refer to steps 1 - 2 of “Basic procedure” to bring
up the indication “PROJECT ERASE” on the
display. Then press the [ENTER] key.
The project to erase is shown on the display.
PRJ ERS
PRJ011
Duplicating a project
Project name
This operation copies a specified project that is saved on the
11
Project number
hard disk.
1.
2.
Turn the dial to select the project to be erased.
3.
Press the [ENTER] key to erase the project, or
Refer to steps 1 - 2 of “Basic procedure” to bring
up the indication “PROJECT COPY” on the display.
Then press the [ENTER] key.
press the [EXIT] key to cancel.
The name and number of the project to copy are shown on
To return to main screan after erasing is completed, press the
the display.
[EXIT]key.
PRJ COPY
PRJ012
Project name
2.
12
Project number
N OTE
• Once a project has been erased, it cannot be recovered.
Use this operation with care.
• This item cannot be selected for projects with the protect
ON setting.
Turn the dial to select the copy source project, and
press the [ENTER] key.
126
ZOOM MRS-802