Download Grapholas 10.3 User Guide - Product Documentation

Grapholas 10.3
27 / 47
7.6.9 Defining the Image Position
"X Position" and "Y Position" change the position of the selected image. "Set Position" is
used to set the position of the image.
7.6.10
Overlaying Images
If you activate "Overlay", the images can also be placed one on top of the other.
7.6.11
Entering the Grid and the Angle Manually
The rasterization and the angle of the image can be entered using "Linecount..." if the image
does not already have this information. Images without this information are marked in red on the
working surface. "Testform" marks test wedges if these are not to be sent to the customer.
If highlighted in grey, these two fields are irrelevant for the selected CDI.