Download RT-Base S User Manual
Transcript
Specification The technical specification of the RT-Base S unit is shown in Table 6. Table 6. RT-Base S specification Parameter Specification Power rating 12 V dc, 2.5 A maximum Mains power 110–240 V ac, 50–60 Hz, 3 A maximum Battery 12.8 V, 10 Ah, LiFePO4 Charge time ≈ 6 hours Operating time 30 hours typical (>24 hours at -10 °C) Operating temperature -10–50 °C Charge temperature -20–40 °C Environment IP65 when lid is secured shut Output format RTCA, RTCA2, RTCM, RTCMv3, CMR, CMR+ Output interface RS232 serial, Ethernet Case dimensions 474 × 415 × 149 mm (external) Mass 11.9 kg (inc. all accessories) Please note: The casing of the RT-Base S is air-tight when closed, but it is fitted with a one-way valve to release excess pressure. If the RT-Base S has been transported by air, it may be necessary to open the valve (located behind the handle) to balance the air pressure inside the case before it can be opened. 10 Oxford Technical Solutions