Download RT-Base S User Manual

Transcript
Specification
The technical specification of the RT-Base S unit is shown in Table 6.
Table 6. RT-Base S specification
Parameter
Specification
Power rating
12 V dc, 2.5 A maximum
Mains power
110–240 V ac, 50–60 Hz, 3 A maximum
Battery
12.8 V, 10 Ah, LiFePO4
Charge time
≈ 6 hours
Operating time
30 hours typical (>24 hours at -10 °C)
Operating temperature
-10–50 °C
Charge temperature
-20–40 °C
Environment
IP65 when lid is secured shut
Output format
RTCA, RTCA2, RTCM, RTCMv3, CMR, CMR+
Output interface
RS232 serial, Ethernet
Case dimensions
474 × 415 × 149 mm (external)
Mass
11.9 kg (inc. all accessories)
Please note: The casing of the RT-Base S is air-tight when closed, but it is fitted with a one-way valve to
release excess pressure. If the RT-Base S has been transported by air, it may be necessary to open the
valve (located behind the handle) to balance the air pressure inside the case before it can be opened.
10
Oxford Technical Solutions