Download Manual

4.29 Read host watchdog timeout value
Modules:
For all JDAM modules
Description:
Read host watchdog timeout value
Command:
~AA2[CHK](cr)
Syntax:
~
Command leading code
AA
Module address ID (00 to FF)
2
Command for reading watchdog timeout value
CHK Check sum
(cr)
Carriage return
! AAEVV[CHK](cr) Valid command
?AA[CHK](cr)
Response:
Invalid command
!
Delimiter for valid command
?
Delimiter for invalid command
AA
Module address ID
E
Host watchdog enabled status
E=1 – Enable
E=0 – Disable
VV
Timeout value in Hex format from 01
to FF=25.5 seconds (one unit is 0.1 sec)
CHK Check sum
(cr)
Carriage return
(also see section 4.30)
61