Download User Manual: eBee

Maintenance and repair of the eBee
of the eBee follow these steps:
1. Connect the battery to the drone.
2. Connect the USB cable between the computer on which you installed eMotion and the autopilot of the eBee as shown in the figure. The connector is
beside the camera connector and is marked with a
icon. The status LED
will turn white as soon as you connect the cable.
3. Launch eMotion⁵³.
connect USB cable
to autopilot
4. In eMotion, click the
icon and select ‘Updater eBee...’.
5. Click ‘Update’ to begin the updating process. Wait until the process is complete, which is indicated by the text ‘File downloaded successfully’.
⁵³ you can also update without launching eMotion using the separate Updater eBee program in the
Windows Start or Apps menu
137